SKU:

Anytek P4 3.7V Micro USB Charging Semiconductor Fingerprint Sensing Small Padlock
Anytek P4 3.7V Mirco USB充电半导体指纹感应小挂锁
条码：6922153881043
HSCode：83014000
批量修改原始型号 		采购：Nicole  编辑：Lebron  产品经理：caifeng

1. Semiconductor fingerprint sensing technology, fingerprint is your password, providing protection for your items and the safety of your home.
2. The fingerprint sensor can record 10 sets of fingerprints for 10 times, which can be used by many people. At the same time, the first and second fingerprints are the administrator's fingerprint by default, and the second to tenth fingerprints need to be authorized by the administrator.
3. The recognition rate is high, the falsehood rate is less than 0.02%, and the rejection rate is less than one percent.
4. The fingerprint collection time is less than or equal to 0.5 seconds, and the fingerprint matching time is less than or equal to 1 second.
5. Short press to unlock, press and hold for 5 seconds to set the fingerprint, long press for 10 seconds to delete the fingerprint.
6. Built-in 3.7V 80mAh lithium battery, can stand for 6 months, unlock a thousand times.
7. LED tri-color lights to help you master the use of the padlock. When the battery is low, the red light flashes. During charging, the red light is on, full, and the red light is off.
8. When the voltage is equal to or lower than 3.5V, the red indicator light will flash for 15 seconds. If it is always in low power state, it will alarm once every minute. Emergency charging can be done with the 5V 0.5A Mirco USB cable.

Parameter
1. Button: Stroke detection button x 1 (built-in).
2. Lock beam diameter: 12mm.
3. No mechanical lock cylinder.
4. IC proximity card: not supported.
5. Motor: Planetary geared motor M10.
6. Working voltage: 3.7V.
7. Charging current: 5V/200MA.
8. Working temperature: -20-70 degrees Celsius.
9. Product size: 28x52.5x12mm.
10. Net weight: 58g.


1. 半导体指纹感应技术，指纹就是您的密码，为您物品及房屋的安全提供保护。
2. 指纹传感器可录10次存10组指纹，可多人共同使用。同时默认第一第二枚指纹为管理员指纹，采集第二到第十枚指纹需要管理员授权。
3. 识别率高，认假率小于百分之零点零零贰，拒真率小于百分之一。
4. 指纹采集时间小于或等于0.5秒，指纹匹配时间小于或等于1秒。
5. 短按开锁，长按5秒设置指纹，长按10秒删除指纹。
6. 内置3.7V 80mAh锂电池，可待机6个月，开锁一千次。
7. LED三色灯，帮助您掌握挂锁使用状态。电量低时，红灯闪烁，充电中，红灯长亮，充满电，红灯灭。
8. 当电压等于或低于3.5V时，红色指示灯会快闪15秒，如一直处于低电状态，每隔一分钟就会·低声报警一次。可使用5V 0.5A Mirco USB数据线应急充电。

参数
1. 按键：行程检测键 x 1（内置）。
2. 锁梁直径：12mm。
3. 无机械锁芯。
4. IC感应卡：不支持。
5. 电机：行星减速电机 M10。
6. 工作电压：3.7V。
7. 充电电流：5V/200MA。
8. 工作温度：-20-70摄氏度。
9. 产品尺寸：28x52.5x12mm。
10. 净重：58g。
代码：

Specification:
Package weight
One package Weight 0.07kgs / 0.15lb
One Package Size 4.8cm * 7.3cm * 3.2cm / 1.89inch * 2.87inch * 1.26inch
Qty per Carton 150
Carton Weight 11.2kgs / 24.69lb
Carton Size 42cm * 42cm * 17cm / 16.54inch * 16.54inch * 6.69inch

代码：