SKU:

For DJI Air 3 STARTRC Split Type Heightened Anti-fall Landing Gear Training Rack (Grey)
适用于大疆DJI Air 3 STARTRC分体式脚架增高起落架 112527 (颜色：灰色)
条码：6922410989871
HSCode：39269010
批量修改原始型号 		采购：Eva  编辑：Shadow  产品经理：zengli

Features
1. Specifically designed for DJI AIR 3, it fits the four legs brackets of AIR 3 and has a split tripod design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes, and will not open for obstacle avoidance.
2. Can effectively increase the distance between the drone and the ground by 25 mm. When AIR 3 takes off or lands on uneven ground, it can reduce the impact force, allow the drone to land smoothly, and protect the AIR 3s body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the DJI AIR 3 drone ability to adapt to the ground environment during takeoff and landing.
3. Adopting a split quick-release design, the battery can be quickly replaced without disassembly, and does not affect the folding of the drone arms. You only need to disassemble the heightening tripods on the two rear tripods to store them in the original bag, STARTRC special bag, and commercially available bags. In most bags, the other two disassembled tripods are also small and easy to carry.
4. Lightweight design. The entire landing gear weighs 32g. The lightweight design will not add extra burden to the flight of AIR 3, and it will not shake or fall off during flight.
5. Note: It cannot be used with propeller protection; the aircraft cannot be put into a waterproof box or other storage equipment without removing the rear tripod.

Specifications
1. Material: ABS
2. Dimensions: Front leg: 86x49x29mm; Rear leg: 58x48x29mm
3. Weight: 32g

Package List
1. Left front leg stand x 1
2. Left rear leg stand x 1
3. Right front leg stand x 1
4. Right rear leg stand x 1
5. Instruction manual x 1


特点
1. 专为适用于DJI AIR 3 设计， 贴合AIR 3 四个脚架，分体式脚架设计，不会遮挡指示灯、补光灯、底部传感器和散热孔，不会开启避障。
2. 可有效增加无人机与地面之间的距离 25 毫米。当AIR 3 在不平整的地面起飞或降落时，它可以减少冲击力，使无人机平稳降落，并保护 AIR 3 的机身、传感器和云台相机，防止损坏。可避免地面碎片或水渍弄脏或损坏无人机机身、云台和螺旋桨。有效提高了 DJI AIR 3 无人机在起飞和降落时对地面环境的适应能力。
3. 采用分体式快拆设计，无需拆卸即可快速更换电池，不影响无人机机臂折叠，只需拆卸两个后脚架上的增高脚架即可收纳进原装包、STARTRC专用包及市面上绝大部分包中，其他两个拆卸下来的脚架也小巧易于携带。
4. 轻量化设计，整个起落架的重量为 32g，轻巧的设计不会给 AIR 3 的飞行增加额外负担，飞行过程中不会晃动或脱落。
5. 注意：不能与桨保一起使用；不拆后脚架无法将飞机放入防水箱等容纳装备中。

参数
1. 材质：ABS
2. 尺寸：前脚架：86x49x29mm；后脚架：58x48x29mm
3. 重量: 32g

包装清单
1. 左前脚架 x 1
2. 左后脚架 x 1
3. 右前脚架 x 1
4. 右后脚架 x 1
5. 说明书 x 1


代码：

Specification:
General
Compatible with DJI:  Air 3
Package weight
One package Weight 0.1kgs / 0.22lb
One Package Size 13.0cm * 15.0cm * 4.0cm / 5.12inch * 5.91inch * 1.57inch
Qty per Carton 100
Carton Weight 10kgs / 22.05lb
Carton Size 66cm * 32cm * 42cm / 25.98inch * 12.6inch * 16.54inch

代码：