SKU:

N12 66 in 1 Car Paintless Dent Removal Fender Damage Repair Puller Lifter, Plug Type:US Plug
N12 66件套 汽车无痕修复工具套装，插头规格:美规
条码：6922393081966
HSCode：82051000
批量修改原始型号 		采购：Felix  编辑：Ellie  产品经理：caifeng

Feature:
1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.
2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.
3. Working voltage: 100V-240V / 12V
4. Power: 20W

How to use the PDR tools:
1. Clean the dent and keep it dry
2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes
3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes
4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear
5. Vlean the surface with cleaning tools set
6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level
7. If the dent and convex surface are still existent, repeat the steps above, until you are satisfied with it

Package list:
Arc Crowbar x 1
M10 screw x 1
M10 nut x 1
M10 Handle Nut x 1
Puller adapter x 1
M8 Multi-directional stander x 1
Purple tabs x 24
Yellow glue sticks x 10
White glue sticks x 10
Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5m
Hammer x 1
Knock down pen x 1
Pen heads x 9
Towel x 1
Shovels x 2
Alcohol bottle（alcohol not include) x 1
English manual x 1
特征：
1. 易于操作：凹痕拉拔器套件提供了一个适合任何人使用的平台，因为配件一点也不复杂。使用手册中描述的详细维修步骤很容易弹出凹痕。
2. 应用广泛：无漆汽车凹痕去除剂可用于去除汽车上的凹痕，以及车身折痕和冰雹损坏，对汽车、冰箱、洗衣机和其他金属器具的凹痕有效。节省时间和金钱。
3. 工作电压：100V-240V/12V
4. 功率：20W

如何使用 PDR 工具：
1. 清洁凹痕并保持干燥
2. 取出胶棒，插入胶枪，等待5分钟以上
3. 取出合适的胶水标签，将胶水涂抹在标签上，快速贴在凹痕表面，并继续在表面涂抹胶水，直到标签完全被胶水覆盖，然后等待超过10分钟
4. 用卡舌固定滑锤，将滑锤向后拉，直到凹痕消失
5. 使用清洁工具套装清洁表面
6. 如果表面有凸起，用敲击笔和锤子轻轻敲打，反复敲打，直到表面平整
7. 如果凹凸面仍然存在，重复上述步骤，直到您满意为止

包装清单：
电弧撬棒 x 1
M10 螺丝 x 1
M10 螺母 x 1
M10 手柄螺母 x 1
拉拔器适配器 x 1
M8 多向支架 x 1
紫色标签 x 24
黄色胶棒 x 10
白胶棒 x 10
胶枪（美规/欧规/英规/车载充电器插头）x 1，线长：1.4m，注意：车载点烟器是5m
锤子 x 1
击倒笔 x 1
笔头 x 9
毛巾 x 1
铲子 x 2
酒精瓶（不含酒精） x 1
英文说明书 x 1
代码：

Specification:
Package weight
One package Weight 2.05kgs / 4.52lb
One Package Size 58.0cm * 12.0cm * 8.0cm / 22.83inch * 4.72inch * 3.15inch
Qty per Carton 12
Carton Weight 26.1kgs / 57.54lb
Carton Size 62cm * 38cm * 32cm / 24.41inch * 14.96inch * 12.6inch

代码：