SKU:

LiitoKala lii-500 Lithium Battery Charger for Li-ion IMR 18650, 26650, 16340, 14500, 10440, 18500, US Plug
LiitoKala lii-500 锂电池充电器 美规
条码：6922489971524
HSCode：85069090
批量修改原始型号 		采购：Jack  编辑：Ellie  产品经理：Maura

1. Size: 16.2*9.6*3.6cm
2. Weight: 200g
3. DC input voltage: 12V/2.0A
4. USB is only used as 5V mobile output, the output current is 1000mA, and the output of USB connected to power supply is invalid.
5. USB 5V output is only valid for 3.7V lithium battery, and Ni-MH boost is not valid.
6. Charging current of lithium battery: 4.2V 300mA/500mA/700mA/1000mA
7. Charging current of Ni-MH battery: 1.48V 300mA/500mA/700mA/1000mA
8. Charger has 6 keys, mode selection key (MODE), current selection key (CURREN), independent selection and view data key (1234), which is simple and convenient to use.
9. In any case, hold down the MODE key and hold for 3 seconds to change the CHARGE (charging) mode or FAST TEST, NOR TEST (capacity detection) mode, and then press the corresponding function button again in 8 seconds to change. It can enter the working state eight seconds after the current, independent, mixed charging, capacity detection and selected function. In the working state, it can press the (1234) key lightly to view the current (mA)./ Capacity (mAh) / Voltage (V) / Time (h) / Internal Resistance (mR) Data Reference Value.
10. Specifications of rechargeable batteries: 18650, 26650, 14500, AA, AAA, etc.

Warning
1. The charger can only charge cylindrical lithium-ion batteries and nickel-hydrogen batteries, but not lithium iron phosphate batteries.
2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current.
3. Do not use other power adapters.
4. Charger charging and discharging may be hot, pay attention not to scald;
5. When stopping using, please unplug the power supply and battery.
6. It can only be used indoors.
7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.


1. 尺寸：16.2*9.6*3.6cm
2. 重量：200g
3. 直流输入电压：12V/2.0A
4. USB 仅作为5V移动输出，输出电流为1000mA，连接电源USB输出无效
5. USB 5V 输出仅对3.7V锂电池有效，镍氢升压无效
6. 锂电池充电电流： 4.2V 300mA /500mA/700mA /1000mA
7. 镍氢电池充电电流：1.48V 300mA /500mA/700mA /1000mA
8. 充电器有6个按键，模式选择键（MODE）、电流选择键（CURREN）、独立选择及查看数据键（1234），使用简洁方便
9. 在任何情况下按住MODE键并保持 3秒钟改变CHARGE（充电）模式或FAST TEST、NOR TEST（容量检测）模式,然后在8秒钟内再次轻按功能对应按键就可以改变、于电流 、独立、混充、容量检测、选定功能后8秒钟进入工作状态，在工作状态下可以轻按（1234）键，查看电流(mA) /容量(mAh)/电压(V)/时间(h)/内阻(mR) 数据参考值。
10. 可充电池规格： 18650，26650，14500、AA、AAA等

警告
1.此充电器只可以充圆柱锂离子电池和镍氢电池，不可充磷酸铁锂电池；
2.在使用前，请认真参考说明书,注意充电电池的推荐充电电流,不要超过推荐电流充电；
3.请勿使用其它电源适配器；
4.充电器充放电时可能会发热,注意不要烫伤；
5.停止使用时,请拔掉电源，拔除电池；
6.只可以在正常室内使用。
7. 此产品检测数据仅供参考，实际情况请参照专业仪器。


代码：

Specification:
Package weight
One package Weight 0.24kgs / 0.53lb
One Package Size 20.0cm * 15.0cm * 5.0cm / 7.87inch * 5.91inch * 1.97inch
Qty per Carton 40
Carton Weight 10.9kgs / 24.03lb
Carton Size 52cm * 37cm * 37cm / 20.47inch * 14.57inch * 14.57inch

代码：