SKU:

LiitoKala Lii-PD4 Nickel-hydrogen Battery Charger for Li-ion / IMR LiFePO4 26650，21700，20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
LiitoKala Lii-PD4 镍氢电池充电器
条码：6922502000972
HSCode：85069090
批量修改原始型号 		采购：Jack  编辑：Ellie  产品经理：Maura

1. Size: 14.7*10*3.7
2. Weight: 221g
3. Input power supply: AC power cord 110-240V 50/60Hz (standard built-in power supply)/DC 12V 1A (optional)
4. Output Voltage: DC 4.2V for Li-Ion, DC 4.35V for IMR, DC 3.65V for LiFePO4, DC 1.48V for NiMH/NI-Cd
5. Output current: Li-Ion/IMR/LiFePO4 2000mA*1 (only the fourth channel), 1000mA*2, 500mA*3, 500mA*4, NiMH/NiCd: 1000mA*2, 500mA*3, 500mA*4
6. Mode: Each of the four buttons controls a slot. Within 5 seconds after power-on is put into the battery, the type of rechargeable battery can be selected by clicking the mode key of the corresponding slot. After 5 seconds, the type of rechargeable battery (e.g. 3.20V 3.80V) needs to be selected, the battery can be charged.
7. LCD: When the charger is connected to the power supply, the LCD display will be fully displayed for 3 seconds. If the battery is not placed in the charging tank, the LCD display null. 30 seconds after no operation, the display will be extinguished. When the battery is detected, the LCD displays the corresponding slot number and the battery type symbol (Li-ion-3.70V) flickers. If not, click the Mode key to select the type of battery to charge. If not, the battery will be charged in 5 seconds after entering the default recognition. At this time, the charge display percentage symbol flickers to indicate that the charging is going on, and the voltage, capacity and time are displayed. The percentage shows 100% when charging is completed and End is shown at the lower right.
8. Compatible battery types and models: Li-ion/IMR/LiFePO4: 26650, 21700, 20700, 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440; NiMH/Cd: AA, AAA, SC, C

Warning:
1. The charger can only charge cylindrical lithium-ion batteries (3.7V, 3.8V), nickel-hydrogen/nickel-cadmium batteries (1.2V) and lithium iron phosphate batteries (3.2V).
2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current.
3. If the 12V DC adapter is chosen, the output current should be no less than 1A.
4. Charger charging may be hot, pay attention not to scald;
5. When stopping using, please unplug the power supply and battery.
6. It can only be used indoors.
7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.


1. 尺寸：14.7*10*3.7
2. 重量：221g
3. 输入电源：AC 电源线110-240V 50/60Hz (标配内置电源) / DC 12V 1A (选配)
4. 输出电压: DC 4.2V for Li-Ion, DC 4.35V for IMR, DC 3.65V for LiFePO4, DC 1.48V for NiMH/NI-Cd
5. 输出电流: Li-Ion/IMR/LiFePO4 2000mA*1(仅限第四通道), 1000mA*2, 500mA*3, 500mA*4, NiMH/NiCd: 1000mA*2, 500mA*3, 500mA*4
6. 按键（Mode ）:4个按键每个按键控制一槽，通电放入电池后5秒内，单击对应槽的Mode键可选择充电电池类型，当选定需要充电电池类型（例如3.20V 3.80V）5秒钟后进入充电状态。
7. LCD：充电器接上电源后, LCD显示器全亮显3秒,如果电池未放入充电槽, LCD显示null.无操作后30秒显示器熄灭。当检测有电池时，LCD显示对应的槽号，同时电池类型符号（Li-ion-3.70V）闪烁，此时单击Mode键可选择所需要充电的电池类型，如果不选择，5秒后进入默认识别的电池进行充电，此时充电显示百分比符号闪表示充电正在进行，同时电压，容量，时间都有显示。充电完成时百分比显示100%同时右下方显示End。
8. 兼容电池种类及型号: Li-ion / IMR/LiFePO4: 26650，21700，20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440; NiMH/Cd: AA, AAA，SC, C

警告:
1.此充电器只可以充圆柱锂离子电池(3.7V,3.8V)，镍氢/镍镉(1.2V)、磷酸铁锂电池(3.2V)；
2.在使用前，请认真参考说明书,注意充电电池的推荐充电电流,不要超过推荐电流充电；
3.如选择使用12V DC适配器, 输出电流需不小于1A；
4.充电器充电时可能会发热,注意不要烫伤；
5.停止使用时,请拔掉电源，拔除电池；
6.只可以在正常室内使用。
7.此产品检测数据仅供参考，实际情况请参照专业仪器。


代码：

Specification:
Package weight
One package Weight 0.26kgs / 0.57lb
One Package Size 19.0cm * 12.0cm * 5.0cm / 7.48inch * 4.72inch * 1.97inch
Qty per Carton 40
Carton Weight 11.7kgs / 25.79lb
Carton Size 48cm * 34cm * 34cm / 18.9inch * 13.39inch * 13.39inch

代码：