SKU:

Original DJI FPV 2pcs Air Unit Antenna MMCX Straight
原装DJI FPV 2个一卖天空端天线MMCX 直头
条码：6922722810674
HSCode：39269010
批量修改原始型号 		采购：Kitty  编辑：Shadow  产品经理：zengli

1. LHCP antenna, strong anti-interference ability, MMCX connector
2. Long-distance transmission, small size, light weight, and drop resistance
3. VSWR less than 2 Corresponding frequency bands: 5.4 GHz - 6 GHz, 5.8 GHz
4. Measured axial ratio: 3 dB
5. Measured gain: 2.75 dB
6. Note: Pulling out the antenna directly may cause the inner needle and collar to fall off or be damaged
7. Compatible products: suitable for DJI FPV air system
8. Size: 12.7x12.7x80mm
9. Weight: 3.9g

Kind tips
1. When installing the air end antenna, it is necessary to separate the two antennas as much as possible, and the cylindrical parts of the two antenna ends should be separated by at least 40 mm to achieve the communication effect; at the same time, try to keep away from metal and carbon fiber structural objects, and ensure that the antenna is not blocked during flight
2. The air end module adopts the MMCX antenna interface. Since the antenna interface (inner pin) of the air end module is small, when pulling out the antenna, please fix the air end module with one hand, press the two ends of the antenna head with the other hand, and take it out horizontally.


1. LHCP 天线、抗干扰能力强、MMCX接头
2. 远距离传输、尺寸小、重量轻、耐摔
3. VSWR小于2 对应频段：5.4 GHz - 6 GHz、5.8 GHz
4. 实测轴比：3 dB
5. 实测增益：2.75 dB
6. 注意：直接拔出天线易造成内针及套环脱落或损毁
7. 适配产品：适用于DJI FPV 天空端
8. 尺寸：12.7x12.7x80mm
9. 重量：3.9g

温馨提示
1. 安装天空端天线时需将两根天线尽量分离，两天线端头圆柱体部分至少间隔 40 毫米，以达到通信效果；同时尽量远离金属及碳纤维结构物件，并确保飞行时天线不被遮挡
2. 天空端模块采用 MMCX 天线接口，由于天空端模块的天线接口（内针）较小，拔出天线时请一手固定天空端模块，一手按住天线头两端，水平向外取出


代码：

Specification:
General
Compatible with DJI:  FPV
Package weight
One package Weight 0.04kgs / 0.09lb
One Package Size 10.0cm * 3.0cm * 6.0cm / 3.94inch * 1.18inch * 2.36inch
Qty per Carton 300
Carton Weight 10.5kgs / 23.15lb
Carton Size 60cm * 32cm * 32cm / 23.62inch * 12.6inch * 12.6inch

代码：