SKU:

QC3.0 Fast Charging Mobile Power Set Power Bank Shell Assembly Kit(Red/No Battery)
QC3.0 快充移动电源套 充电宝外壳组装套件（红/无电池）
条码：6922848419857
HSCode：85444219
批量修改原始型号 		采购：Karl  编辑：Teri  产品经理：Forest


1. Power: 18W (dual USB output + TYPE-C port/Android port dual input solution)
2. OUT 1 output: 5V/3A
3. OUT 2 output (orange USB): 5V/3A, 9V/2A, 12V/1.5A (support 5V charging and discharging)
4. IN input (micro Android port): 5V/3A, 9V/2A
5. Type-C output: 5V/3A, 9V/2A, 12V/1.5A (only output is available when PD protocol is supported)
6. Type-C input: 5V/3A, 9V/2A, 12V/1.5A
7. Other functions: long press to turn on the flashlight, double-click to turn off the output; the motherboard will not burn if installed
8. Battery requirements: flat head 18650 battery without protection board (65MM length), internal resistance within 60 milliohms, 9. discharge above 2C; fast charge power is large, using disassembled battery will affect the experience
10. Quick charge specification: OUT 2 (orange USB)
11. Weight: about 90 grams
12. Size: 15x2 may be around


Charging specifications:
1. Battery end: adaptive charging current adjustment, charging current up to 5A (the first charge to 99 percent will be slower to 100 percent, because the identification battery can reach a safe voltage, please be patient)

Discharge specification:
1. Support line compensation, synchronous switch discharge 5V/2A efficiency can reach more than 95 percent
2. Multiple protections and high reliability: built-in input over-voltage and under-voltage protection; integrated output over-current, over-voltage, and short-circuit protection; built-in battery over-charge, over-discharge, and over-current protection; built-in IC over-temperature protection; integrated charging Discharge battery temperature NTC protection
3. ESD 4KV, input (including CC pin) withstand voltage 25V


Note: After the battery is inserted, the power bank must be charged and activated before the output will be output; the product only contains the motherboard and the shell, no battery, no power cord

1. 功率：18W（双USB输出+TYPE-C口/安卓口双输入方案）
2. OUT 1输出：5V/3A
3. OUT 2输出（橙色USB）：5V/3A，9V/2A，12V/1.5A（支持5V边充边放）
4. IN输入（micro安卓口）：5V/3A，9V/2A
5. Type-C输出：5V/3A，9V/2A，12V/1.5A(支持PD协议才有输出)
6. Type-C输入：5V/3A，9V/2A，12V/1.5A
7. 其他功能：长按开启手电，双击关闭输出；装反不烧主板
8. 电池要求：平头无保护板18650电池（65MM长），内阻60毫欧内，9. 放电2C以上；快充功率大，使用拆机电池会影响体验效果
10. 快充规格：OUT 2（橙色USB）
11. 重量：90克左右
12. 尺寸：15x2可能左右


充电规格：
1. 电池端：自适应充电电流调节，充电电流可达5A（首次充电到百分之99会较慢到百分之100，因为识别电池可达安全电压，请耐心等待）

放电规格：
1. 支持线补，同步开关放电5V/2A效率可达95百分之以上
2. 多重保护、高可靠性：内置输入过压、欠压保护；集成输出过流、过压、短路保护；自带电池过充、过放、过流保护；内置IC过温保护；集成充放电电池温度NTC保护
3. ESD 4KV，输入（含CC引脚）耐压25V


注意：电池放入后，给充电宝先充电激活才有输出；产品仅包含主板加外壳，无电池，无电源线
代码：

Specification:
Package weight
One package Weight 0.1kgs / 0.22lb
One Package Size 18.0cm * 8.0cm * 3.0cm / 7.09inch * 3.15inch * 1.18inch
Qty per Carton 288
Carton Weight 30kgs / 66.14lb
Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch

代码：