SKU:

Multifunctional Vehicle-Mounted High-Power Digital Display LED Lighting Air Pump, Spec: Car 12V
多功能车载大功率数显LED照明充气泵，规格：车载12V
条码：6922350119409
HSCode：82051000
批量修改原始型号 		采购：Felix  编辑：Ellie  产品经理：caifeng


1. Material: metal + plastic
2. Air volume: 30L
3. Current: 10A
4. Power: 120W
5. Voltage: 12-230V
6. Pressure: 120IPS
7. Air pressure flow: 35L/min
8. Cylinder specifications: horizontal bar
9. Convenient inflatable, intelligent digital display
10. Preset tire pressure, stop when full
11. AC/DC dual-use, dual-use for home and car
12. Power supply type: cigarette lighter, household power supply
13. Scope of application: tire, balloon, basketball inflation
14. Product function: inflation / lighting / pressure measurement / preset tire pressure
15. Inflation time: about 5 minutes (195 size tires are empty to full)
16. All accessories include: host, manual, accessories 3 gas nozzles + fuse
17. Power cord length: 2.8 meters, inflation tube length: 0.5 meters, household wire length: 1.6 meters
18. Size: 205x100x160mm
19. Net weight: 1kg

Precautions:
1. It cannot be used to inflate the tires of large and overweight vehicles, such as trucks, large trucks, container trucks, etc.
2. Please start the car engine to increase the power when using it, without consuming the car battery power
3. This machine is limited to DC (DC12V12A) power supply, and household high-voltage AC (AC220V) power supply is not allowed
4. When inflating, please stop for 10 minutes to cool down after 10 minutes of continuous work to prevent damage to the air pump and accessories, and to extend the life of the motor. When the rubber boat is inflated, it can work continuously for 15 minutes
5. Normal tire pressure can reach 30PSI in about 3-5 minutes when inflated, while larger tires will take a little longer; if the indicator of the meter rises quickly to 50-100PSI when inflation starts, it means that the air is blocked. , The air does not enter the tires, at this time, you need to immediately unplug the air nozzle connector and re-operate, otherwise the motor and the instrument will be easily damaged
6. Do not leave the body when using it, pay attention to the tire pressure at any time, and not be too saturated
7. The machine should avoid dampness, heavy falls and sand and mud intrusion, and prevent children from playing with it to avoid damage
8. The pressure required for each type of tire is different, please refer to the label on the side of the car tire, or ask the car manufacturer

1. 材质：金属+塑料
2. 风量：30L
3. 电流：10A
4. 功率：120W
5. 电压：12-230V
6. 压力：120IPS
7. 气压流量：35L/分钟
8. 缸体规格：单杠
9. 便捷充气，智能数显
10. 预设胎压，充满即停
11. AC/DC两用，家车两用
12. 电源型式：点烟器，家用电源
13. 适用范围：轮胎，气球，篮球充气
14. 产品功能：充气 / 照明 / 测压/ 预设胎压
15. 充气时间： 5分钟左右（195尺寸轮胎空胎到充满）
16. 全部配件包含：主机、说明书、附件3个气嘴+保险丝
17. 电源线长：2.8米，充气管长：0.5米，家用电线长度：1.6米
18. 尺寸：205x100x160mm
19. 净重：1kg

注意事项：
1. 不可使用在大型和超重的车辆轮胎充气，如卡车、大货车、箱式集装车等
2. 用时请发动汽车引擎增强电力，不消耗汽车电瓶电力
3. 本机限使用直流（ DC12V12A ）电源，不可使用家用高压交流（AC220V）电源
4. 充气时，请在连续工作10分钟后停机10分钟进行冷却，以防止损坏气泵及配件，并可延长马达寿命。橡皮艇充气时，可连续工作 15分钟
5. 一般轮胎在充气时，约在 3-5 分钟既可到达 30PSI 正常胎压，大轮胎则会更长一点时间；如开始充气时仪表之指针快速上升到50—100PSI，则表示空气受到阻塞，空气没有进入轮胎，此时需立即拔下气咀接头，重新操作，否则马达及仪表容易损坏
6. 使用时人不要离开机体，随时注意胎压，不可太过饱和
7. 本机应避免潮湿，重摔及沙泥侵入，避免小孩玩弄，以免受到损伤
8. 每一种轮胎所需压力都不同，请参考汽车轮胎侧边的标示，或询问汽车制造商
代码：

Specification:
Package weight
One package Weight 1.2kgs / 2.65lb
One Package Size 22.0cm * 12.0cm * 17.0cm / 8.66inch * 4.72inch * 6.69inch
Qty per Carton 24
Carton Weight 30kgs / 66.14lb
Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch

代码：