SKU:

20W Mini Dehumidifier For Home Bathroom Air Dryer Moisture Absorber EU Plug
20W 口袋除湿器迷你循环静音除湿器家用卧室衣柜鞋柜吸湿器 欧规
条码：6922451882902
HSCode：85169090
批量修改原始型号 		采购：Eva  编辑：Celery  产品经理：caifeng


1. Recyclable: Recyclable silica particles are used to absorb moisture without consumables. After the moisture absorption reaches a saturated state, the moisture absorption capacity can be restored by simply heating and drying the dehumidification particles.
2. When the humidity in the air environment is too heavy, the micropores on the surface of the silica crystal will capture the excess moisture in the air, preventing reverse infiltration and water accumulation.
3. The power is as low as 20W, and the moisture absorption reaches the saturation level before drying. Drying only requires 1 kilowatt hour of electricity per month (please open the support frame when drying)
4. Tight dehumidification holes cover both sides of the fuselage to increase the moisture absorption area and improve dehumidification efficiency.
5. Designed for dehumidification in small spaces, can be hung or laid flat
6. The orange silica crystals gradually turn into dark green as the absorbed water increases, visually displaying the saturation of water absorption, allowing you to start the drying mode in time.
7. 300 grams of large-capacity dehumidification particles only need to be heated and dried for 15-25 hours, and the moisture absorption can last for 7-15 days, quickly solving the problem of moisture and mold in micro spaces, and keeping you comfortable and dry for a long time.
8. Built-in two PTC ceramic heating elements, combined with thermally conductive aluminum plates, it has good thermal conductivity, a larger heating area, and can be quickly heated back to a dry state. There is no open flame, no odor, non-conductivity, safety and reliability during operation.
9. High temperature resistant and flame retardant ABS material, making drying more reliable
10. Rated power: 20W
11. Rated frequency: 50hz
12. Dimensions: 17.5 x 11.5cm
​

1. 可循环使用：采用可循环使用的二氧化硅颗粒进行吸湿没有耗材，吸湿达到饱和状态后，只需通过加热烘干除湿颗粒便可恢复吸湿能力
2. 当空气环境的湿气太重时，二氧化硅晶体的表面微孔会抓住空气中的多余水分，不反渗不积水
3. 功率低至20W，吸湿达到饱和程度后进行烘干，一个月烘干仅需1度电（烘干时请打开支撑架）
4. 紧密的除湿孔铺满机身两面，增大吸湿面积，提高除湿效率
5. 为小空间除湿而设，可悬挂、平放
6. 橙色的二氧化硅晶体随着吸附水分的增加而逐渐变成墨绿色，直观显示吸水的饱和度，便于您及时开启烘干模式
7. 300克大容量除湿粒子只需要加热烘干15-25小时，吸湿可持续7-15天，快速解决微空间潮湿发霉的烦恼，长效保持舒适干爽
8. 内置两片PTC陶瓷发热体，配合导热铝板，导热性能好，发热面积更大，能快速加热还原回干燥状态，工作过程中无明火，无异味，不导电，安全可靠
9. 耐高温阻燃级ABS材质，烘干更放心
10. 额定功率：20W
11. 额定频率：50hz
12. 尺寸：17.5 x 11.5cm
代码：

Specification:
Package weight
One package Weight 1.0kgs / 2.2lb
One Package Size 23.0cm * 14.0cm * 7.0cm / 9.06inch * 5.51inch * 2.76inch
Qty per Carton 14
Carton Weight 15.1kgs / 33.29lb
Carton Size 25cm * 30cm * 51cm / 9.84inch * 11.81inch * 20.08inch

代码：