SKU:

CH341A Programmer Module USB Motherboard Routing Liquid Crystals Disassembly Free SOP8 Test Tool
CH341A 编程器模块 USB主板路由液晶 免拆SOP8测试工具
条码:6922728728025
HSCode:90329000
批量修改原始型号
采购:Karl  编辑:Joy  产品经理:Maura


Product features:
1. Adopts FT232BL chip with external EEPRON (93C46)
2. Support Windows 10
3. Support 3 power supply modes: 5V external power supply, 3.3V external power supply, external power supply (requires 3.3V-5V)
4. With 3 LEDs: TXD LED, RXD LED, POWER LED
5. GND, RXD, TXD, 3V3, 5V: using a curved pin pin out
6. The rest of the function PIN: reserved pads CTS, RTS

Instructions for use: (to access the MCU as an example)
1. GND: connected to GND
2. RXD: connect to MCU.TX (Signal flow: MCU.TX - FT232 - PC.RX)
3. TXD: connect to MCU.RX (signal flow: PC.TX - FT232 - MCU.RX)
4. 3V3/5V: output 3.3V or 5V (the module is powered by USB, the jumper cap must be jumped to 3.3V or 5V)
5. RTS: connect to MCU.CTS (signal flow: PC.RTS - FT232 - MCU.CTS)
6. CTS: connect to MCU.RTS (Signal flow: MCU.RTS - FT232 - PC.CTS)



产品特性:
1. 采用FT232BL芯片,外置EEPRON(93C46)
2. 支持Windows 10
3. 支持3种供电模式:5V对外供电、3.3V对外供电、由外部供电(要求3.3V-5V)
4. 带3个LED:TXD LED、RXD LED、POWER LED
5. GND、RXD、TXD、3V3、5V:采用弯排针引出
6. 其余功能PIN:预留焊盘CTS、RTS

使用说明:(以接入MCU为例)
1. GND:接GND
2. RXD:接MCU.TX ( 信号流向:MCU.TX - FT232 - PC.RX )
3. TXD:接MCU.RX ( 信号流向:PC.TX - FT232 - MCU.RX )
4. 3V3/5V:输出3.3V或5V(模块由USB供电,须将跳线帽跳到3.3V或5V)
5. RTS:接MCU.CTS ( 信号流向:PC.RTS - FT232 - MCU.CTS )
6. CTS:接MCU.RTS ( 信号流向:MCU.RTS - FT232 - PC.CTS )


代码:

Specification:
Package weight
One package Weight 0.02kgs / 0.04lb
One Package Size 6.0cm * 3.0cm * 2.0cm / 2.36inch * 1.18inch * 0.79inch
Qty per Carton 1200
Carton Weight 25.1kgs / 55.34lb
Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch

代码: