SKU:

Adjustable Voltage Solar Charging Module Auto Power On Voltage Regulator Accessory
可调电压太阳能充电模块 自动通电稳压配件
条码：6922867987035
HSCode：90329000
批量修改原始型号 		采购：Felix  编辑：Randi  产品经理：Maura


1. The current size can be set for limiting the output current, constant current drive, battery charging
2. Comes with output anti-backflow function, no need to add anti-backflow diode when charging battery
3. After undervoltage protection, as long as the input voltage can be restored to start without re-power off, can be restored
4. Enlarge the heat sink and copper, high power rectifier diode
5. Usage:
- As a general lift module with overcurrent protection ability to use
- As a battery charger
- As a high-power LED constant current driver module
6. Note: this module in more than 3A, 35W use, please strengthen the heat dissipation

Parameters:
1. Input voltage: 4.8-30V
2. Output voltage: 0.5-30V
3. Output current: can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation
4. Output power: 35W with natural heat dissipation, 60W with enhanced heat dissipation
5. Conversion efficiency: 88 percent or so
6. Short circuit protection: yes
7. Operating frequency: 180KHz
8. Size: 68 x 37 x 22mm, mounting hole diameter 3mm
9. Weight: 38.7g

1. 可以设置电流大小，用于限制输出电流、恒流驱动、电池充电等场合
2. 自带输出防倒灌功能，给电池充电时不用另外加防倒灌二极管
3. 欠压保护后，只要达到输入电压即可恢复启动不需要重新断电,即可恢复
4. 加大散热片和敷铜，大功率整流二极管
5. 使用方法：
- 作为具有过流保护能力的普通升降压模块使用
- 作为电池充电器使用
- 作为大功率LED恒流驱动模块使用
6. 注意：本模块在超过3A、35W使用时，请加强散热

参数：
1. 输入电压：4.8-30V
2. 输出电压：0.5-30V
3. 输出电流：能长期稳定工作在3A，加强散热下可达到4A
4. 输出功率：自然散热35W，加强散热60W
5. 转换效率：百分之88左右
6. 短路保护：有
7. 工作频率：180KHz
8. 尺寸：68 x 37 x 22mm，安装孔径3mm
9. 重量：38.7g
代码：

Specification:
Package weight
One package Weight 0.05kgs / 0.11lb
One Package Size 15.0cm * 10.0cm * 3.0cm / 5.91inch * 3.94inch * 1.18inch
Qty per Carton 120
Carton Weight 6kgs / 13.23lb
Carton Size 51cm * 38cm * 32cm / 20.08inch * 14.96inch * 12.6inch

代码：