SKU:

LKTOP 100W USB-C / Type-C Desktop Charger Adapter For DJI Mini Series/Air 3/Mavic 3 Series Battery(US Plug)
LKTOP 100W USB-C桌面充电器适用于大疆Mini /Air 3 /Mavic 3 无人机（美规）
条码：6922963739975
HSCode：39269010
批量修改原始型号 		采购：Eva  编辑：Celery  产品经理：zengli


1. The 100W USB-C battery charger has two USB-C output ports and can quickly charge DJI Mavic 3 series/Air 3/Mini series smart flight batteries, DJI remote controllers and other devices with USB-C ports.
2. With powerful 100W output, this power adapter can charge the smart flight battery and remote controller at the same time, saving you valuable time and ensuring you are always ready to fly.
3. Equipped with overvoltage and overcurrent protection to protect your device from damage and ensure a stable and reliable charging experience.
4. Wide compatibility: Applicable to a range of DJI products, such as DJI Mavic 3 Pro, DJI Mavic 3 Cine, DJI Mavic 3 Classic, DJI Mavic 3, DJI Air 3, DJI Mini 4 Pro, DJI Mini 3, DJI Mini 3 Pro , DJI Mini 2 SE, DJI Mini 2, DI Mini SE, Mavic Mini, DJI remote control, DJI Avata, DJI Goggles 2 battery, and other USB-C port devices.
5. Support PPS and PD fast charging protocols

Parameter:
1. Input voltage: 100V to 240V (AC), 50Hz to 60Hz, 2.5A
2. USB-C1 output: 100W (Max)
3. USB-C2 output: 100W (Max)
4. Total output power: 100W (Max). When used simultaneously, the maximum output power of one interface is 82W and the maximum output power of the other interface is 18W. The charger will dynamically allocate the output power of the two interfaces based on the load power.
5. Working environment temperature: 5-40 degrees Celsius
6. Product size: 73.5 X 70 X 32mm
7. Product net weight: 268+/-5g
8. Charging time:
--For DJI Mavic3 smart flight battery: about 1 hour and 10 minutes
--For DJI RC-N1 remote control: about 2 hours and 40 minutes
--For DJI RC remote control: about 2 hours
--For DJI RC Pro remote control: about 2 hours
--For DJI RC Pro Industrial Edition remote control: about 1 hour and 30 minutes
--For DJI Avata Intelligent Flight Battery: about 47 minutes
--For DJI Goggles 2 battery: about 1 hour and 50 minutes
(When two charging interfaces are charging at the same time, the charging time will be slightly longer, please wait patiently. The charging time is measured in an experimental environment (room temperature 25 degrees Celsius) and is for reference only.)

Packing list:
100W battery charger x 1
AC power cord x 1
USB-C to USB-C cable x 1

1. 100W USB-C 电池充电器具有两个 USB-C 输出端口，可以为 DJI Mavic 3 系列/Air 3/Mini 系列智能飞行电池、DJI 遥控器和其他具有 USB-C 端口的设备快速充电。
2. 凭借强大的 100W 输出，该电源适配器可以同时为智能飞行电池和遥控器充电，节省您宝贵的时间，确保您随时准备飞行。
3. 配备过压和过流保护，可确保您的设备免受损坏，并确保稳定可靠的充电体验。
4. 广泛兼容性：适用于一系列 DJI 产品，例如 DJI Mavic 3 Pro、DJI Mavic 3 Cine、DJI Mavic 3 Classic、DJI Mavic 3、DJI Air 3 、 DJI Mini 4 Pro、DJI Mini 3、DJI Mini 3 Pro、DJI Mini 2 SE、DJI Mini 2、DI Mini SE、Mavic Mini、DJI 遥控器、DJI Avata、DJI Goggles 2 电池以及其他 USB-C 端口设备。
5. 支持PPS和PD快充协议

参数：
1. 输入电压：100伏至240伏（交流电），50赫兹至60赫兹，2.5安
2. USB-C1输出：100W (Max)
3. USB-C2输出：100W (Max)
4. 输出总功率：100W(Max)。同时使用时，其中一个接口的最大输出功率为82W，另一个接口的最大输出功率为18W，充电器会根据负载功率动态分配两个接口的输出功率。
5. 工作环境温度： 5-40摄氏度
6. 产品尺寸：73.5 X 70 X 32mm
7. 产品净重：268+/-5g
8. 充电耗时：
--适用于DJI Mavic3智能飞行电池：约1小时10分钟
--适用于DJI RC-N1遥控器：约2小时40分钟
--适用于DJI RC遥控器：约2小时
--适用于DJI RC Pro遥控器：约2小时
--适用于DJI RC Pro行业版遥控器：约1小时30分钟
--适用于DJI Avata 智能飞行电池：约47分钟
--适用于DJI Goggles 2电池：约1小时50分钟
（两个充电接口同时充电时，充电时间略有延长，请耐心等待。充电耗时均为实验环境下（室温25摄氏度情况下）测得，仅供参考。）

包装清单：
100W电池充电器 x 1
交流电源线 x 1
USB-C 转 USB-C 电缆 x 1
代码：

Specification:
General
Compatible with DJI:  Air 3
Package weight
One package Weight 0.39kgs / 0.86lb
One Package Size 13.0cm * 10.0cm * 4.0cm / 5.12inch * 3.94inch * 1.57inch
Qty per Carton 80
Carton Weight 32.7kgs / 72.09lb
Carton Size 41cm * 32cm * 38cm / 16.14inch * 12.6inch * 14.96inch

代码：