SKU:

SINOTIMER MH0302 Intelligent High Precision Temperature Humidity Controller Digital Display Temperature and Humidity Meter
SINOTIMER MH0302 智能高精度温湿度控制器 数显温湿度计
条码：6922082006708
HSCode：90303390
批量修改原始型号 		采购：Kitty  编辑：Jessica  产品经理：Maura


1. Operating power: AC220V, 50HZ
2. Power consumption: less than 2W
3. Resolution: 0.1
4. Setting temperature: -40.0-120 degrees Celsius
5. Setting humidity: 0-99.9%
6. Basic error: temperature: less than 0.5% FS; humidity: less than 4.5% FS
7. Display device: LED (0. 56 inch)
8. Control output: AC250V 3A (resistive load)
9. Operating environment: -10 - 50 degrees Celsius, 45-85% RH
10. External size: about 7.2 x 7.2 x 8cm
11. Opening size: about 6.8 x 6.8cm

Main uses:
1. Apply to the baking room, grain depot, warehouse, machine room, breeding, textile industry and other need for automatic dehumidification or humidification and automatic temperature exhaust or heating occasions
2. Suitable for automatic heating and dehumidification of outdoor terminal box and distribution box, preventing all kinds of malfunctioning accidents caused by creepage between terminals
3. Suitable for automatic heating and dehumidification of indoor high-voltage power distribution equipment and high-voltage switch operating mechanism, automatic heating in low-temperature environments to prevent switch malfunction caused by insulation creepage and mechanism failure in low-temperature environments
4. Apply to the switching mechanism box, trolley type switchgear, medium-set cabinet, box transformer and other equipment in the box for a number of parts of the moisture-proof, low-temperature on-line monitoring

Features:
1. Real-time display of temperature and humidity, optional modules can realize the temperature and humidity transmission output and RS485 communication function
2. Using high-performance, high-precision, corrosion-resistant, long-life digital temperature and humidity sensors, wide measurement range, good linearity, can work reliably for a long time in a variety of environments
3. Sensor with 4 wires for temperature and humidity signal transmission, the distance between the sensor and the instrument can be within 30m

1. 工作电源：AC220V, 50HZ
2. 功耗：小于2W
3. 分辨率：0.1
4. 设定温度：-40.0-120摄氏度
5. 设定湿度：0-99.9%
6. 基本误差：温度：小于0.5%FS；湿度：小于4.5%FS
7. 显示器件：LED （0. 56英寸）
8. 控制输出：AC250V 3A (阻性负载)
9. 使用环境：-10 - 50摄氏度，45-85%RH
10. 外型尺寸：约7.2 x 7.2 x 8cm
11. 开孔尺寸：约6.8 x 6.8cm

主要用途：
1. 适用于烤房、粮库、仓库、机房、养殖、纺织业和其它需要自动除湿或加湿及自动排温或加温的场合
2. 适用于室外端子箱，配电箱的自动加热除湿，防止端子间爬电引起的各种误动作事故
3. 适用于室内高压配电装置及高压开关操作机构箱内的自动加热除湿，低温环境下的自动加热，以防止绝缘爬电而引起的开关误动作及低温环境下的机构失灵
4. 适用于开关机构箱内、手车式开关柜、中置柜、箱变等设备的箱内对多个部位进行防潮，低温的在线监测

特点：
1. 实时显示温度和湿度，选配不同的模块可以实现温湿度变送输出和RS485通信功能
2. 采用高性能、高精度、抗腐蚀、长寿命的数字温度和湿度传感器，测量范围宽，线性好，能长期在各种环境下可靠工作
3. 传感器用4根导线进行温湿度信号传输，传感器和仪表间距离可在30米以内
代码：

Specification:
Package weight
One package Weight 0.31kgs / 0.68lb
One Package Size 11.0cm * 11.0cm * 9.0cm / 4.33inch * 4.33inch * 3.54inch
Qty per Carton 45
Carton Weight 13.5kgs / 29.76lb
Carton Size 47cm * 35cm * 35cm / 18.5inch * 13.78inch * 13.78inch

代码：