SKU:

SINOTIMER Small Mechanical Temperature Regulator Control Panel Thermostat, Model: KTO011
SINOTIMER 小型机械式温度调节器控制柜恒温器，型号：KTO011
条码：6922661050910
HSCode：90303390
批量修改原始型号 		采购：Kitty  编辑：Randi  产品经理：Maura


1. Widely used in communication, wind power generation, fire-fighting equipment, ships, petrochemical industry, large-scale factories, coastal factories, wharves, water treatment facilities, equipment, etc
2. Mini size, simple and convenient installation
3. Long service life, good durability
4. High switching performance, high sensitivity
5. Function:
- KTO011: red, thermostat (normally closed), for controlling heaters
- KTS011: blue, thermostat (normally open), for controlling fans or switching signaling devices
- ZR011: thermostat (normally open and normally closed integrated design), dual-use heating and cooling
6. Working principle: due to different coefficients of thermal expansion, bimetal in the temperature change, the two sides of the thermal expansion and contraction of different degrees, so at different temperatures, the degree of its bending changes; temperature is higher than the expansion of the bimetal temperature, the bimetal contact position of the deformation and disconnect the circuit is closed, the temperature is lower than the expansion of the temperature of the bimetal, the bimetal contact position returns to its original shape and closed, the circuit is closed
7. The thermostat is divided into normally open and normally closed two kinds:
- Normally closed: when the temperature is set, the thermostat is in the normally closed state, when the actual ambient temperature drops to or near the set temperature, it will start the load heating, usually the thermostat is in the normally closed state, when the actual ambient temperature is greater than the set temperature, the load is in the state of stopping the operation
- Normally open: when the temperature is set, the thermostat is in normally open state, when the actual ambient temperature is greater than or close to the set temperature, the load will be started to dissipate heat, usually the thermostat is in normally open state, when the actual ambient temperature is lower than the set temperature, the load is in the state of stopping operation

Parameters:
1. Switching temperature control: +/-7K (+/-4K tolerance)
2. Sensing element: temperature-sensitive material
3. Contact type: quick action contact
4. Contact resistance: less than 10 milliohms
5. Service life: more than 100000 cycles
6. Switch: AC250V, 10(2)A; AC120V, 15(2)A; DC 30W
7. EMC: EN 55014-1-2; EN 61000-3-2; EN 61000-3-3
8. Wiring: 2.5 square millimeter wire
9. Mounting: 35mm DIN rail
10. Shell material: plastic
11. Operating/storage temperature: -80-80 degrees celsius
12. Protection class: IP20
13. Dimensions:
- KTO011/KTS011: 60 x 33 x 43mm
- ZR011: 67 x 50 x 46mm

1. 广泛用于通信、风力发电、消防设备、船舶、石油化工、大型工厂、沿海工厂、码头、水处理设施、设备等
2. 尺寸迷你，安装简单方便
3. 使用寿命长，耐用性好
4. 高开关性能，灵敏度高
5. 功能：
- KTO011：红色，温控器（常闭)，用于控制加热器
- KTS011：蓝色，温控器（常开），用于控制风机或开关信号装置
- ZR011：温控器(常开常闭一体化设计)，加热散热两用
6. 工作原理：由于热膨胀系数不同，双金属片在温度改变时，两面的热胀冷缩程度不同，因此在不同的温度下，其弯曲程度发生改变；温度高于双金属片的膨胀温度时，双金属片接点位置变形而断开,电路断开，温度低于双金属片的膨胀温度时，双金属片接点位置恢复原形而闭合，电路闭合
7. 温控器分常开和常闭两种：
- 常闭：当设置好温度后，温控器处在常闭状态，当实际环境温度降到或接近设定温度时，会启动负载加热，通常温控器处在常闭状态，当实际环境温度大于设定温度时，负载总是处在停运行状态
- 常开：当设置好温度后，温控器处于常开状态，当实际环境温度大于会接近设定温度时，会启动负载散热，通常温控器都处在常开状态，当实际环境温度低于设定温度时，负载总是处在停运状态

参数：
1. 开关温控：+/-7K（+/-4K tolerance）
2. 传感元件：感温材料
3. 触点类型：快速动作接点
4. 触点电阻：小于10毫欧姆
5. 使用寿命：大于100000个周期
6. 开关：AC250V，10（2）A；AC120V，15（2）A；DC 30W
7. EMC：EN 55014-1-2；EN 61000-3-2；EN 61000-3-3
8. 接线方式：2.5平方毫米导线
9. 安装方式：35mm DIN导轨
10. 外壳材质：塑料
11. 操作/储存温度：-80-80摄氏度
12. 防护等级：IP20
13. 尺寸：
- KTO011/KTS011：60 x 33 x 43mm
- ZR011：67 x 50 x 46mm
代码：

Specification:
Package weight
One package Weight 0.05kgs / 0.11lb
One Package Size 7.0cm * 6.0cm * 6.0cm / 2.76inch * 2.36inch * 2.36inch
Qty per Carton 210
Carton Weight 11.6kgs / 25.57lb
Carton Size 51cm * 38cm * 32cm / 20.08inch * 14.96inch * 12.6inch

代码：