SKU:

Waveshare SIM8262E-M2 5G HAT For Raspberry Pi, Quad Antennas 5G NSA, 5G/4G/3G Compatible(23254)
微雪 SIM8262E-M2 5G HAT 适用于 Raspberry Pi，四天线 5G NSA，兼容 5G/4G/3G（23254）
条码：6922961653190
HSCode：85176299
批量修改原始型号 		采购：Cary  编辑：Theresa  产品经理：Maura


Features:
1. Based on Qualcomm platform, supports 5G NSA and SA networking, and supports multi-mode and multi-band
2. Multi-constellation dual-frequency positioning: GPS, Beidou, Glonass, Galileo, QZSS
3. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi or Jetson Nano motherboard for high-speed 5G communication
4. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 / RM5XX series, set by DIP switch
5. Onboard UART, PWR and RST control pins with built-in voltage level converter enabled via DIP switch for use with hosts such as Raspberry Pi or Arduino
6. The onboard USB-C interface can be turned on by a switch to connect an independent power supply to the module, supporting more loads and providing stable and flexible power supply.
7. Onboard power switch, reset button and LED indicator light for easy switching on and off or monitoring module operating status
8. 4 x SMA to IPEX antenna connectors with pre-soldered SMA terminals for antenna connection
9. 2 x SIM card slots, dual SIM card single standby, can be switched by AT command
10. Onboard audio jack and audio decoder for audio operations such as making phone calls
11. High-efficiency power circuit, output current up to 3A

Product parameters:
1. 5G standard: 3GPP R16
2. Chip: Qualcomm Snapdragon X62
3. Sub-6G: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78, n79
4. LTE-FDD: B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32
5. LTE-TDD: B38, B39, B40, B41, B42, B43
6. WCDMA: B1, B5, B8
7. GNSS: GPS, GLONASS, Beidou, Galileo, QZSS
8. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL)
9. LTE: 1 Gbps (downlink)/200 Mbps (uplink)
10. HSPA+: 42 Mbps (downstream)/5.76 Mbps (upstream)
11. Operating system: Windows/Linux/Android
12. Communication protocol: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0
13. Dial-up: RNDIS, NDIS, PPP, MBIM
14. SMS: supports MT, MO, CB, text, PDU
15. Firmware upgrade: Support firmware upgrade through USB port
16. SIM card: 1.8V/2.95V
17. Antenna: suitable for 3G/4G/5G/GNSS, 6 × IPEX-4 connector, 4 × IPEX-4 connector
18. Power supply: 3.135-4.4V

特点：
1. 基于高通平台，支持5G NSA和SA组网，支持多模多频段
2. 多星座双频定位：GPS、北斗、Glonass、Galileo、QZSS
3. USB 3.1 端口（兼容 USB 2.0），用于连接 PC、Raspberry Pi 或 Jetson Nano 主板以实现高速 5G 通信
4. 标准M.2 B KEY插槽，兼容不同5G模块：SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 / RM5XX系列，通过拨码开关设置
5. 板载 UART、PWR 和 RST 控制引脚，内置电压电平转换器，通过 DIP 开关启用，可与 Raspberry Pi 或 Arduino 等主机一起使用
6. 板载USB-C接口，可通过开关开启，为模块连接独立电源，支持更多负载，供电稳定灵活
7. 板载电源开关、复位按钮和LED指示灯，方便开关机或监控模块运行状态
8. 4 x SMA 转 IPEX 天线连接器，带有用于连接天线的预焊接 SMA 端子
9. 2 x SIM卡槽，双卡单待，可通过AT指令切换
10. 板载音频插孔和音频解码器，可进行打电话等音频操作
11. 高效率电源电路，输出电流高达3A

产品参数：
1. 5G标准：3GPP R16
2. 芯片：高通骁龙X62
3. Sub-6G：n1、n3、n5、n7、n8、n20、n28、n38、n40、n41、n77、n78、n79
4. LTE-FDD：B1、B3、B5、B7、B8、B18、B19、B20、B26、B28、B32
5. LTE-TDD：B38、B39、B40、B41、B42、B43
6. WCDMA：B1、B5、B8
7. GNSS：GPS、GLONASS、北斗、伽利略、QZSS
8. Sub-6G：2.4 Gbps (DL) / 500 Mbps (UL)
9. LTE：1 Gbps（下行）/200 Mbps（上行）
10. HSPA+：42 Mbps（下行）/5.76 Mbps（上行）
11. 操作系统：Windows/Linux/Android
12. 通讯协议：TCP/IP、IPV4、IPV6、Multi-PDP、FTP、FTPS、HTTP、HTTPS、MQTTS、DNS、SSL3.0
13. 拨号：RNDIS、NDIS、PPP、MBIM
14. 短信：支持MT、MO、CB、文本、PDU
15. 固件升级：支持通过USB口进行固件升级
16. SIM卡：1.8V/2.95V
17. 天线：适用于3G/4G/5G/GNSS，6 × IPEX-4 连接器，4 × IPEX-4 连接器
18. 电源：3.135-4.4V
代码：

Specification:
Package weight
One package Weight 0.57kgs / 1.26lb
One Package Size 22.0cm * 16.0cm * 8.0cm / 8.66inch * 6.3inch * 3.15inch
Qty per Carton 16
Carton Weight 11.5kgs / 25.35lb
Carton Size 46cm * 34cm * 34cm / 18.11inch * 13.39inch * 13.39inch

代码：