SKU:

JUNTEK Programmable Dual-Channel DDS Function Arbitrary Waveform Signal Generator, Frequency: 60MHz(EU Plug)
JUNTEK 程控双通道DDS函数任意波形信号发生器，频率：60MHz（欧规）
条码：6922748109126
HSCode：90303390
批量修改原始型号 		采购：Dani  编辑：Leah  产品经理：Maura


1. Waveform length: 2048
2. Point waveform sampling rate: 266MSa/s
3. Waveform vertical resolution: 14 bits
4. Amplitude resolution: 1mV
5. Waveform output impedance: 50 ohms (typical)
6. Protection: All signal output terminals can work within 60 under load short circuit conditions
7. Sweep channel: CH1 or CH2
8. Sweep type: linear sweep, logarithmic sweep
9. Sweep time: 0.1s~999.9s
10. Input signal voltage range: 2Vpp~20Vpp
11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)
12. Period measurement: 0.01us resolution, measurable 20s (MAX)
13. Burst function pulse number: 1-1048575
14. Count range: 0-4294967295
15. Coupling mode: DC and AC
16. Counting mode: Manual
17. TTL/CMOS output: Low level 0.3V; High level 1V~10V
18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)
19. Number of storage: 100 groups
20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)
21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)
22. Interface mode: USB to serial interface
23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development
24. Communication rate: Standard 115200bps
25. Communication protocol: Command line mode is adopted, and the protocol is open
26. Voltage range: DC5V
27. Prompt sound: Users can turn it on or off through program settings
28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed
29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable
30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms
31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work
32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees
33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 1048575
34. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable
35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)
36. Dimensions: 143x95x54mm
37. Weight: 400g



1. 波形长度：2048
2. 点波形采样率：266MSa/s
3. 波形垂直分辨率：14位
4. 幅值分辨率：1mV
5. 波形输出阻抗：50欧姆 (典型)
6. 保护：所有信号输出端都可在负载短路情况下工作60以内
7. 扫频通道：CH1或CH2
8. 扫频类型：线性扫描、对数扫描
9. 扫频时间：0.1s~999.9s
10. 输入信号电压范围：2Vpp~20Vpp
11. 脉宽测量：0.01us分辨率，可测20s（MAX）
12. 周期测量：0.01us分辨率，可测20s（MAX）
13. 猝发功能脉冲数：1-1048575
14. 计数范围：0-4294967295
15. 耦合方式：直流和交流两种耦合方式
16. 计数方式：手动
17. TTL/CMOS输出：低电平0.3V；高电平1V~10V
18. 猝发模式：手动触发、CH2触发、外部触发(AC)、外部触发(DC)
19. 存储数量：100组
20. 位置：00到99 （开机默认调入00存储位置参数）
21. 任意波数量：1到60共60组（开机默认为15组)
22. 接口方式：采用USB转串行接口
23. 扩展接口：具有TTL电平方式的串口，方便用户二次开发
24. 通讯速率：采用标准115200bps
25. 通讯协议：采用命令行方式，协议公开
26. 电压范围：DC5V
27. 提示音：用户可通过程序设置开启或关闭
28. 采用2.4寸高清彩色液晶显示屏，操作流畅度好，响应速度快
29. 硅胶材质的快捷键，不仅极大的简化了操作步骤，而且手感舒适
30. 提供上位机软件和通信协议，方便客户二次开发，上位机软件有绘制任意波形的功能
31. 采用高品质铝合金外壳，体积小巧，方便携带，搭配一个5V2A的移动电源（不含）就可以实现户外长时间工作
32. 等性能双通道可以同时输出相同或不同的函数信号或任意波形信号，所有的参数都可以独立调节，两个通道之间相位差0-359.9度连续可调
33. 可以使用正弦波、方波、锯齿波、或任意波生成脉冲串，脉冲周期个数0-1048575之间连续可调
34. 脉冲波的脉冲宽度和脉冲周期时间数字化精确可调
35. 免费提供上位机软件和通信协议，使用上位机软件可以绘制任意波形；使用通信协议可以二次开发编程；仪器所有的功能都可以使用上位机软件控制（不连接电脑，单机同样可以完成所有的操作)
36. 尺寸：143x95x54mm
37. 重量：400g


代码：

Specification:
Package weight
One package Weight 0.8kgs / 1.76lb
One Package Size 23.0cm * 17.0cm * 11.0cm / 9.06inch * 6.69inch * 4.33inch
Qty per Carton 12
Carton Weight 10.7kgs / 23.59lb
Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch

代码：