SKU:

AERMOTOR Automotive Circuit Relay Tester Repair Tool(AERBJ-707)
AERMOTOR 汽车电路继电器测试仪维修工具（AERBJ-707）
条码：6922335687369
HSCode：90308200
批量修改原始型号 		采购：Felix  编辑：Leah  产品经理：caifeng


1. Can quickly detect whether your relay is normal, easy to use, suitable for automotive relays on the market, support 12V and 24V relay testing
2. Most car lights, wipers, starters, air conditioners, electric seats, electric doors and windows, anti-lock brakes and audio use relays. Automotive relays are subject to vibration, high temperature, low temperature, humidity, etc., which will reduce their lifespan. However, once a relay fails, it will immediately cause system components to be paralyzed, and even cause the entire aircraft to be unusable. Therefore, it is very important to regularly check the relays in the car
3. Through the continuous car battery to the relay coil, the detector can normally check the contact function of the relay
4. The tester observes the contact data, closing time, relay inertia, etc. at each test stage
5. Easy to operate, easy to carry, and durable

Operation instructions:
1. When testing, clamp the red clip to the positive pole of the battery and the black clip to the negative pole of the battery
2. When testing a 12V relay, it needs to be connected to a 12V battery
3. After connecting to the power supply, the device lights up red and the relay can be inserted
4. To test the 4-pin relay, turn the switch to 4PIN, and to test the 5-pin relay, turn the switch to 5PIN
5. After connecting the relay and adjusting the pin position switch, you can press the button
6. If the pin position is incorrect or the relay is damaged during the test, the red LED light will be on
7. When the pin position is set correctly, the tester will light up the green LED light and flash 10 times to indicate that the relay is normal



1. 能够快速的检测出你的继电器是否正常，使用简单，适用于市面的汽车继电器，支持12V和24V继电器测试
2. 大多数汽车车灯、雨刷、启动器、空调、电动座椅、电动门窗、防抱死刹车和音响都使用继电器，汽车继电器遭受振动、高温、低温、潮湿等，都会降低其寿命，但继电器一旦发生故障，会立即造成系统部件瘫痪，甚至造成整个飞行器无法使用，因此，定期检查车内的继电器是非常重要的
3. 通过连续的汽车电池到继电器线圈，探测器可以正常检查继电器的触点功能
4. 测试仪在每个测试阶段观察触点数据、闭合时间、继电器惯性等
5. 操作方便，方便携带，经久耐用

操作说明：
1. 测试时把红色夹子夹到电瓶正极，黑色夹子则夹到电瓶负极
2. 测试12V继电器时需要连接到12V电瓶上
3. 接入电源后设备亮红灯既可以插入继电器
4. 测试4脚继电器把开关拨到4PIN，测试5脚继电器把开关拨到5PIN
5. 接入继电器调好脚位开关后就可以按下按钮
6. 测试时脚位不对或者继电器损坏了，测试就会亮红色LED灯
7. 当脚位设置正确时，测试仪会亮绿色LED灯并且闪烁10次绿灯则表示继电器正常


代码：

Specification:
Package weight
One package Weight 0.26kgs / 0.57lb
One Package Size 19.0cm * 16.0cm * 4.0cm / 7.48inch * 6.3inch * 1.57inch
Qty per Carton 32
Carton Weight 9.5kgs / 20.94lb
Carton Size 40cm * 34cm * 34cm / 15.75inch * 13.39inch * 13.39inch

代码：