SKU:

Waveshare AlphaBot, Raspberry Pi robot building kit, includes Pi 3 Model B+
Waveshare AlphaBot，Raspberry Pi机器人构建套件，包括Pi 3 Model B + 14802
条码：6922375072656
HSCode：90329000
批量修改原始型号 		采购：Cary  编辑：Shadow  产品经理：Maura

1. Raspberry Pi robot building kit: AlphaBot + Camera, Comes with US plug power adapter
2. Note: Raspberry Pi is NOT included.

Overview
1. This kit comes with AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and a camera (with servo and 2 DOF pan head).
2. With modules in the kit, you can fast get started with robotic development like line tracking, obstacle avoidance, IR remote control, and video monitoring via network, etc. What's more, thanks to the rich Raspberry Pi open source resources, and the modular design of AlphaBot, you'll learn how to extend and refit, and finally build your own Raspberry Pi robot.

AlphaBot Features
1. Raspberry Pi/Arduino interfaces, works with either one separately, or both
2. Arduino extend header, supports Arduino shields
3. Modular design, plug-and-play modules like line tracking, obstacle avoidance, speed measuring, etc. eliminating the trouble of connecting mess wires.
4. LM298P motor driver with diode protection circuit, more safety
5. LM2596 voltage regular, provides stable 5V power to the Raspberry Pi/Arduino
6. TLC1543 AD acquisition chip, allows the Pi to use analog sensors

What is on the AlphaBot Mainboard
1. Raspberry Pi interface: for connecting Raspberry Pi
2. Arduino interface: for connecting Arduino
3. Motor interface
4. Ultrasonic module interface
5. Servo module interface
6. Obstacle avoidance module interface
7. Speed measuring interface
8. Battery holder: supports 18650 batteries
9. Reserved power input (not soldered): for connecting other external power supply
10. Arduino expansion header: for connecting Arduino shields
11. UART interface: for connecting Bluetooth module, to control the robot remotely via Bluetooth
12. SPI interface: for connecting NRF24L01 wireless module
13. Line tracking module interface
14. TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
15. LM298P: dual H bridge motor driver chip, up to 2A current
16. Anti-reverse diode
17. Power switch
18. LM2596: 5V regulator
19. Power indicator
20. UART switch: turn on to enable serial communication between Raspberry Pi and Arduino
21. IR receiver: control the robot remotely via infrared
22. Raspberry Pi/Arduino selection: select the Raspberry Pi or Arduino to control the robot peripherals
1. Raspberry Pi机器人构建套件：AlphaBot + Camera，配有美国插头电源适配器
2. 注意：不包括Raspberry Pi。

概观
1. 该套件配有AlphaBot机器人平台（线路跟踪，避障，速度测量，红外控制）和摄像头（带伺服和2自由度摇摄头）。
2. 通过套件中的模块，您可以快速开始机器人开发，如线路跟踪，避障，IR远程控制和通过网络等视频监控。此外，得益于丰富的Raspberry Pi开源资源和模块化设计AlphaBot，你将学习如何扩展和改装，最后建立自己的Raspberry Pi机器人。

AlphaBot功能
1. Raspberry Pi / Arduino接口，可以单独使用，也可以同时使用
2. Arduino扩展头，支持Arduino屏蔽
3. 模块化设计，即插即用模块，如线路跟踪，避障，速度测量等，消除了连接乱线的麻烦。
4. LM298P电机驱动器带二极管保护电路，更安全
5. LM2596电压正常，为Raspberry Pi / Arduino提供稳定的5V电源
6. TLC1543 AD采集芯片，允许Pi使用模拟传感器

AlphaBot主板上有什么
1. Raspberry Pi界面：用于连接Raspberry Pi
2. Arduino接口：用于连接Arduino
3. 电机接口
4. 超声波模块接口
5. 伺服模块接口
6. 避障模块接口
7. 速度测量界面
8. 电池座：支持18650电池
9. 预留电源输入（未焊接）：用于连接其他外部电源
10. Arduino扩展头：用于连接Arduino屏蔽
11. UART接口：用于连接蓝牙模块，通过蓝牙远程控制机器人
12. SPI接口：用于连接NRF24L01无线模块
13. 线路跟踪模块接口
14. TLC1543：10位AD采集芯片，允许Pi使用模拟传感器
15. LM298P：双H桥电机驱动芯片，最高2A电流
16. 防反向二极管
17. 电源开关
18. LM2596：5V稳压器
19. 电源指示灯
20. UART开关：打开以启用Raspberry Pi和Arduino之间的串行通信
21. 红外接收器：通过红外线远程控制机器人
22. Raspberry Pi / Arduino选择：选择Raspberry Pi或Arduino来控制机器人外围设备
代码：

Specification:
Package weight
One package Weight 0.05kgs / 0.11lb
One Package Size 19.0cm * 15.0cm * 11.0cm / 7.48inch * 5.91inch * 4.33inch
Qty per Carton 18
Carton Weight 0.90kgs / 1.98lb
Carton Size 57cm * 30cm * 33cm / 22.44inch * 11.81inch * 12.99inch

代码：