SKU:

Waveshare Open429I-C Standard, STM32F4 Development Board
Waveshare Open429I-C标准版，STM32F4开发板 9186
条码：6922288233717
HSCode：90329000
批量修改原始型号 		采购：Cary  编辑：Shadow  产品经理：Maura

STM32 development board designed for STM32F429I, features the STM32F429IGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview
1. Open429I-C is an STM32 development board designed for the STM32F429IGT6 microcontroller, consists of the mother board and the MCU core board Core429I.
2. The Open429I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.

What has on the mother board
1. MCU core board connector: for easily connecting the Core429I
2. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
3. DCMI interface: for connecting camera
4. Capacitive touch panel interface: for connecting capacitive touch panel
5. CAN2 interface: for connecting CAN modules
6. CAN1 interface: for connecting CAN modules
7. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
8. ULPI interface: for connecting high-speed USB peripheral (the STM32F429I integrates USB HS controller without any PHY device)
9. LCD interface 1: for connecting 7inch LCD
10. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
11. LCD interface 2: for connecting 4.3inch LCD
12. I2C2/I2C3 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.
13. SAI1 interface: for connecting audio modules like UDA1380 module
14. Ethernet interface: for connecting Ethernet modules
15. USB connector: USB to UART via the onboard convertor PL2303
16. SPI1/SPI2 interfaces:
- Easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
- Easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
17. I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
18. 8-bit FMC interface: easily connects to peripherals such as NandFlash
19. 5V DC jack
20. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
21. MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
22. PL2303: USB to UART convertor
23. LEDs: convenient for indicating I/O status and/or program running state
24. PL2303 TX-LED / RX-LED
25. 12MHz crystal: for PL2303
26. Joystick: five positions
27. WAKE UP button: used as regular button, and/or wake up the STM32 MCU from sleep
28. USB to UART jumper
29. LED jumper
- Short the jumper to connect to default I/Os used in example code
- Open the jumper to connect to custom I/Os via jumper wires
30. Button/Joystick jumper
- Short the jumper to connect to default I/Os used in example code
- Open the jumper to connect to custom I/Os via jumper wires

Package Contains
1. Open429I-C development board x 1
2. USB type A plug to mini-B plug cable x 1
3. USB type A receptacle to mini-B plug cable x 1
4. 4-pin 2-pin wires pack x 1
5. USB power cable x 1
6. Software CD x 1
STM32开发板专为STM32F429I设计，采用STM32F429IGT6 MCU，集成了各种标准接口，非常便于外设扩展。

概观
1. Open429I-C是专为STM32F429IGT6微控制器设计的STM32开发板，由主板和MCU核心板Core429I组成。
2. Open429I-C支持针对特定应用的各种可选附件板进一步扩展。模块化和开放式设计使其成为使用STM32系列微控制器开始应用开发的理想选择。

什么在主板上
1. MCU核心板连接器：用于轻松连接Core429I
2. USART3接口：可轻松连接RS232，RS485，USB TO 232等。
3. DCMI接口：用于连接摄像头
4.电容式触摸屏界面：用于连接电容式触控面板
5. CAN2接口：用于连接CAN模块
6. CAN1接口：用于连接CAN模块
7. SDIO接口：用于连接Micro SD模块，具有比SPI更快的访问速度
8. ULPI接口：用于连接高速USB外设（STM32F429I集成USB HS控制器，无需任何PHY设备）
9. LCD接口1：用于连接7英寸LCD
10. ONE-WIRE接口：可轻松连接到ONE-WIRE设备（TO-92封装），如温度传感器（DS18B20），电子注册号（DS2401）等。
11. LCD接口2：用于连接4.3英寸LCD
12. I2C2 / I2C3接口：可轻松连接I2C外设，如I / O扩展器（PCF8574），EEPROM（AT24Cxx）等。
13. SAI1接口：用于连接UDA1380模块等音频模块
14.以太网接口：用于连接以太网模块
15. USB连接器：USB至UART通过板载转换器PL2303
16. SPI1 / SPI2接口：
- 轻松连接SPI外设，如DataFlash（AT45DBxx），SD卡，MP3模块等。
- 轻松连接AD / DA模块（SPI1具有AD / DA替代功能）
17. I2S2 / I2S3 / I2C1接口：可轻松连接音频模块等I2S外设。
18. 8位FMC接口：可轻松连接NandFlash等外设
19. 5V DC插孔
20. 5V / 3.3V电源输入/输出：通常用作电源输出，也可与其他用户板共同接地
21. MCU引脚连接器：所有MCU I / O端口均可通过扩展连接器访问，以便进一步扩展
22. PL2303：USB转UART转换器
23. LED：方便指示I / O状态和/或程序运行状态
24. PL2303 TX-LED / RX-LED
25. 12MHz晶振：适用于PL2303
26. 操纵杆：五个位置
27. WAKE UP按钮：用作常规按钮，和/或将STM32 MCU从睡眠状态唤醒
28. USB转UART跳线
29. LED跳线
- 将跳线短接以连接到示例代码中使用的默认I / O.
- 打开跳线，通过跳线连接到自定义I / O.
30. 按钮/操纵杆跳线
- 将跳线短接以连接到示例代码中使用的默认I / O.
- 打开跳线，通过跳线连接到自定义I / O.

包含
1. Open429I-C开发板x 1
2. USB A型插头连接mini-B插头电缆x 1
3. USB A型插座连接mini-B插头电缆x 1
4. 4针2针电线包x 1
5. USB电源线x 1
6. 软件CD x 1
代码：

Specification:
Package weight
One package Weight 0.33kgs / 0.73lb
One Package Size 15.0cm * 8.0cm * 6.0cm / 5.91inch * 3.15inch * 2.36inch
Qty per Carton 120
Carton Weight 15kgs / 33.07lb
Carton Size 60cm * 40cm * 36cm / 23.62inch * 15.75inch * 14.17inch

代码：