1. The 360-degree rotatable angle can adjust the installation position. The upper layer of the product has a black anti-corrosion soft silicone body to avoid scratching the car surface paint after installation. 2. Function: auxiliary mounting bracket for car lights 3. Material: 304 stainless steel 4. Surface treatment: stainless steel 5. Installation board thickness: no more than 8mm 6. Installation position: above the hood 7. Scope of application: can be used to install work lights, fog lights, driving lights, etc. of different thicknesses 8. Suitable for Jeep Wrangler 9. Installation steps: (1). Install the bracket to the car. You can choose the top cover of the car or the roof of the car. (2). Install the headlight on it (3). Vertical 180 degree range adjustment bracket (4). Horizontal 60 degree adjustment bracket (5). Fix the bracket and complete the installation
1. 360度可旋转角度 可调整安装位置 高低左右 产品上层带黑色防腐蚀软硅胶体 避免安装后刮花汽车车面喷漆。 2. 作用：车灯辅助安装支架 3. 材质：304不锈钢 4. 表面处理：不锈钢 5. 安装板厚度：不超过8mm 6. 安装位置：引擎盖上方 7. 适用范围：可用于安装不同厚度的工作灯，雾灯，行车灯等 8. 适用于吉普牧马人 9. 安装步骤： (1). 将支架安装到汽车上。您可以选择汽车的上盖或汽车的顶棚。 (2). 在其上安装前大灯 (3). 垂直方向的180度范围调整支架 (4). 水平60度调整支架 (5). 固定支架并完成安装
提交