1. The real machine opens the mold, effectively fixes the front and rear propellers, protects the propellers in the folded storage state, and prevents them from being damaged when they are put into the backpack; 2. It will not squeeze and damage the propeller, and at the same time, it can fix the propeller during storage, so that it is not easy to shake and cross; 3. Reasonably fix the propeller to fit the fuselage without affecting the use of the lens cap; 4. Half-wrapped chassis design, the base can wrap the motor at the bottom of the drone when storing, preventing debris from entering the motor; 5. The paddle has two holes to adjust the tightness, which is easy to install and remove. 6. Main material: Silicone+ABS 7. Net weight: 15.8g 8. Product size: 8.9 x 7.8 x 6.1cm Packing list: beam paddle base x 1
1. 真机开模,有效固定前后螺旋桨,保护折叠收纳状态下的螺旋桨,防止收入背包时而损坏; 2. 不会挤压损坏螺旋桨,同时在收纳过程中起到固定螺旋桨,使其不易晃动、交叉; 3. 合理固定螺旋桨,贴合机身,同时不影响安装镜头盖使用; 4. 半包式底盘设计,收纳时底座可以包裹无人机底部电机,防止杂物进入电机; 5. 束桨带有两个孔位可调节松紧,易于安装和拆卸。 6. 主要材质:硅胶+ABS 7. 净重:15.8g 8. 产品尺寸: 8.9 x 7.8 x 6.1cm 包装清单:束桨底座 x 1
提交