1. The solar fountain is a landscape fountain device that uses solar energy to drive water pumps. This product uses high-efficiency solar panels and a new type of brushless water pump, which has the advantages of fast start-up, high efficiency and strong stability. In addition, the product floats on the water without external power supply, easy to install and easy to operate. 2. Widely used in garden decoration, birdbath, small pond water circulation oxygenation, rockery fountain and other places. Easy to install and easy to use, as long as there is direct sunlight, the water pump can start to work. 3. This solar brushless water pump adopts Hall elements with high sensitivity and low power consumption, and is driven by efficient and intelligent electronic circuits. The volute design in fluid mechanics is adopted for the impeller cavity to reduce the resistance of water flow, so that the overall performance is better than traditional ones. The efficiency of the structure's solar water pump is increased by 20%. 4. The water pump can be connected with various nozzles of different shapes to spray different types of water. Specifications: 1. Solar panel: 7V/1.5W monocrystalline silicon 2. Solar panel size: diameter 130mm, 160mm 3. Water pump parameters: DC 4.5-12V 4. Flow rate (MAX): 200L/h 5. Lift (MAX): 110cm 6. Water spray height: 35--65cm, the height of water spray will be different when different nozzles are connected. 7. The diameter is 13cm, and the net weight of the product is 200g 8. The diameter is 16cm, and the net weight of the product is 245g Precautions: 1. This product is a solar direct-driven water pump without an external battery. The height of the water spray depends entirely on the intensity of the sun. When the sun is weak, the water pump will not work continuously, but will automatically start repeatedly until the sun reaches a certain intensity. After that, the water pump returns to continuous working state. When using, please place the product under unobstructed sunlight, as shadows will affect the normal operation of the pump. 2. The water pump must be completely submerged in water and cannot be dehydrated for a long time. When the water pump is just immersed in water, because there is air in the water pump, it is recommended to wait for the water pump to spray water normally before inserting the nozzle. 3. Please keep the water source clean and clean the water pump regularly to prevent foreign objects from being sucked into the water pump and causing the water pump to not work properly
1. 太阳能喷泉是利用太阳能驱动水泵抽水的景观性喷泉装置。本产品采用高效太阳能电池板以及新型无刷水泵,具有启动快、效率高、稳定性强的优点。此外,产品漂浮在水面上,无需外接电源,安装方便、操作简单。 2. 广泛应用于花园装饰、鸟澡盆、小池塘水体循环增氧、假山喷泉等场所。安装简单,使用方便,只要有直射阳光,水泵即可启动工作。 3. 本太阳能无刷水泵采用高灵敏度低功耗的霍尔元件,配合高效智能的电子线路驱动,并针对叶轮腔采用流体力学中的蜗壳设计,减少水流的阻力,从而使综合性能比传统结构的太阳能水泵的效率提升20%。 4. 本水泵可以连接各种不同形状的喷头,喷出不同的水型。 规格参数: 1. 太阳能板:7V/1.5W 单晶硅 2. 太阳能板尺寸:直径130mm,160mm 3. 水泵参数:DC 4.5-12V 4. 流量(MAX):200L/h 5. 扬程(MAX):110cm 6. 喷水高度: 35--65cm,连接不同的喷头,喷水的高度会不同。 7. 直径13cm,产品净重200g 8. 直径16cm,产品净重245g 注意事项: 1. 本产品为太阳能直驱水泵,没有外加蓄电池,喷水的高度完全取决于阳光的强弱,在阳光弱的时候,水泵不会连续工作,但会自动的反复启动,直至阳光达到一定强度后水泵恢复连续工作状态。使用时请将产品放置于无遮挡的阳光下,有阴影遮挡会影响水泵正常工作。 2. 水泵必须完全浸入水中,不可长时间脱水工作。当水泵刚浸入水中时,由于水泵里面有空气,建议等水泵正常喷水后在插入喷头。 3. 请保持水源清洁,定期清洗水泵,防止异物被水泵吸入而导致水泵不能正常工作
提交