1. Intelligent safety parachute, high-speed rescue, buzzer warning and positioning 2. Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely (built-in 150mm An battery, working time 4 hours, 1GB data storage) 3. Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers 4. The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing 5. To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware 6. There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched 7. The capsule of Manti 3 Plus is for one-time use. After the parachute is opened, the capsule needs to be replaced before it can be used. 8. When installing, please be careful not to cover the battery switch and the sensor below Parameter: 1. Speed reduction: 5.5m/s 2. Normal working hours: 4 hours 3. Working temperature: -10-60 degrees Celsius 4. Response time: 100 milliseconds 5. Response distance: 8 meters 6. Working altitude: less than or equal to 4000 meters 7. Charging voltage: 5V 1A 8. Equivalent drop distance: 1.6 meters and below 9. Consumable parts: Manti 3 Plus canopy 10. Buzzer: Yes 11. Firmware upgrade: support (DFU) 12. On-board detection: support (6 meters above the ground to enter the alert mode, only after entering the alert mode can the flight accident be detected and the parachute opened) 13. Note: When adapting the parachute to the Phantom series UAV, the software version must be replaced with the Phantom professional version. Product information: - Main material: PC - Net weight: 115.8g - Dimensions: 6 x 6 x 4.2cm (parachute host)/18.1 x 3.2cm (hanger) - Applicable models: suitable for DJI Phantom 2/3/4 Packing list: Parachute host x 1 straps × 3 Charging cable × 1 screw × 8 screwdriver × 1 Nut × 8 Hanging rack × 1 Hanger Buckle × 2 instruction manual × 1
1. 智能安全降落伞,高速救机,蜂鸣器预警定位 2. Manti 3 Plus 内置电子飞行记录仪,可记录无人机飞行和性能参数,记录仪记录的信息可用于无人机飞行事故分析,重现事故过程,具象的分析事故发生原因(内置150毫安电池,工作时间4小时,1GB数据储存) 3. 双传感器数据融合:水平垂直激活,有效避免缠桨,减少救机触发带来的额外炸机风险 4. 飞行姿态精准识别危险全向感知,快至0.5秒即可响应危险情况,从而判断开伞,需要配合内八停桨,使机器安全迫降 5. DFU固件升级,需要下载火萤软件桌面版,即可手动选择机型匹配固件 6. 降落伞主机底部有硅胶垫设计,有效防止刮伤无人机 7. Manti 3 Plus 伞舱为一次性使用,开伞之后需要重新更换伞舱才能使用。 8. 安装时,请注意不要遮挡电池开关及下方传感器 参数: 1. 降速:5.5m/s 2. 正常工作时间:4小时 3. 工作温度:-10-60摄氏度 4. 反应时间:100毫秒 5. 反应距离:8米 6. 工作海拔:小于等于4000米 7. 充电电压:5V 1A 8. 等效坠落距离:1.6米及以下 9. 损耗件:Manti 3 Plus 伞舱 10. 蜂鸣器:有 11. 固件升级:支持(DFU) 12. 上机检测:支持(离地面6米进入警戒模式,进入警戒模式才能检测飞行事故触发开伞) 13. 注意:精灵系列无人机适配降落伞时千万要将软件版本更换为精灵专业版本。 产品信息: -主要材质:PC -净重:115.8g -尺寸:6 x 6 x 4.2cm(降落伞主机)/18.1 x 3.2cm(挂架) -适用机型:适用于大疆精灵2/3/4 包装清单: 降落伞主机 x 1 绑带 × 3 充电线 × 1 螺丝 × 8 螺丝刀 × 1 螺母 × 8 挂架 × 1 挂架扣 × 2 说明书 × 1
提交