1. Material: aluminum alloy + PVC 2. Applicable: bicycles, road bikes, folding bikes 3. The main material is aluminum alloy round tube, which is treated with baking paint. It is light and convenient without deformation. It has strong endurance and is suitable for many models. 4. Triangular fixation, no slipping, can be folded and stored compactly and conveniently when not in use, taking up no space 5. The angle of the parking rack can be fixed or folded by adjusting the knob, and it has anti-slip grooves for easy operation. 6. The connector frame has serrations, and the two serrations interlock, making it easy to fix without slipping and more reliable. 7. The elastic screws at the bottom can adjust the width. Comes with spacers + rubber rings, which will not slip and can be fixed twice, making it more stable. 8. Lift the rear wheel and park it, and lift the bicycle tire off the ground to stably adjust the driving train or brake, clean and other work 9. The two sides are clamped and not easy to slide apart, making the parking firm and reliable. It is convenient and quick to adjust the vehicle's transmission system, repair and clean the vehicle. 10. Size: 31.5x42cm, center distance 15.6cm 11. Weight: 611g
1. 材质:铝合金+PVC 2. 适用:自行车公路车折叠车 3. 主材料选用铝合金圆管,烤漆工艺处理,轻巧便捷不是变形,承受力强,适合多款车型 4. 三角固定,不打滑,不用时可折叠收纳小巧方便,不占空间 5. 可通过调节旋钮来固定停车架角度或折叠,并带有防滑凹槽,操作方便 6. 连接件架有锯齿,两者锯齿咬合,轻松固定不打滑,更可靠 7. 底部松紧螺丝可调节宽度,附赠垫片+像胶圈,不打滑,二次固定,更加稳固 8. 后轮提起停放,自行车轮胎离开地面稳定调整驱动列车或刹车,清洗等工作 9. 两侧夹紧不易滑开,停放牢固可靠,调整车辆变速系统维修清洁车辆,方便快捷 10. 尺寸: 31.5x42cm,中心距离15.6厘米 11. 重量:611g
提交