1. The motor speed has increased by 30% for more responsive control over focus, zoom, and aperture. The motor is compatible with 15mm universal rods. The latency is as low as 10 milliseconds, ensuring swift control response when paired with the DJI Focus Pro Hand Unit. The motor features a built-in RF antenna that allows for linking with the DJI Focus Pro Hand Unit. When paired with the DJI Focus Pro Grip, the grip can power the motor via the USB-C port. 2. 2.4GHz Transmitter Power (EIRP): < 20 dBm (CE/SRRC/MIC), < 26 dBm (FCC) 3. 2.4GHz Transmission Distance: 160 m/100 m 4. Dimensions: 100×61×34 mm (L×W×H) 5. Weight: 123 g 6. Rod diameter: 15 mm 7. Output gear teeth: 30 8. Output gear module: 0.8 Compatibility: DJI RS 4 Pro DJI RS 4 DJI RS 3 Pro DJI RS 3 DJI Focus Pro Grip DJI Focus Pro Hand Unit DJI Ronin 4D Flex Tips: 1. The motor can be powered through third-party devices. Do not use an extra device to power the DJI Focus Pro Motor when it is already powered (e.g., by the DJI Focus Pro Grip), as this may cause device damage. 2. DJI RS 4 Pro can be used with up to two motors simultaneously, while DJI RS 4 only supports one motor. Packing list: Focus Pro Motor × 1 Motor Rod Mount Kit × 1 Focus Gear Strip × 1 Multi-Camera Control Cable (USB-C, 30 cm) × 1 FIZ Sticker × 1 15mm Rod × 1 10mm 1/4"-20 Screw × 2
1. 马达转速提升 30%,让跟焦、变焦、光圈控制响应更灵敏。采用 15 毫米通用导管。延时低至 10 毫秒,与 DJI Focus Pro 手轮之间的控制响应更迅速。内置射频天线,可和 DJI Focus Pro 手轮对频使用。配合 DJI Focus Pro 手柄使用时,手柄可通过 USB-C 口为电机供电。 2. 2.4 GHz 发射功率(EIRP):<20 dBm(CE/SRRC/MIC),<26 dBm(FCC) 3. 2.4 GHz 传输距离:160 米/100 米 4. 尺寸:长 100 毫米,宽 61 毫米,高 34 毫米 5. 重量:123 克 6. 安装管直径:直径 15 毫米 7. 输出齿齿数:30 8. 输出齿模数:0.8 适配产品: DJI RS 4 Pro DJI RS 4 DJI RS 3 Pro DJI RS 3 DJI Focus Pro 手柄 DJI Focus Pro 手轮 DJI Ronin 4D Flex 温馨提示: 跟焦电机支持通过第三方设备供电。不可在 DJI Focus Pro 跟焦电机已有供电设备(例如 DJI Focus Pro 手柄)时使用第三设备供电,否则可能造成设备损坏。 DJI RS 4 Pro 最多支持搭配 2 个电机使用,DJI RS 4 仅支持搭配 1 个电机使用。 包装清单: Focus Pro 电机 × 1 电机安装组件 × 1 跟焦电机齿条 × 1 相机控制线(USB-C,30 cm) × 1 FIZ 贴纸 × 1 15 毫米导管 × 1 10 毫米英制 1/4-20 螺丝 × 2
提交