1. Material: aluminum alloy + high toughness nylon 2. Mobile phone clamp width: manually measured width 88mm (MAX), width 61mm (MIN) 3. Installation range: can be installed on motorcycles/electric vehicles/bicycles/tricycles 4. Handlebar diameter: suitable for handlebar diameters of 19-30mm 5. Shock-absorbing panel design to buffer bumps and impacts, high-elastic shock-absorbing rubber is configured at the four corners, and the built-in limit screws prevent shaking and shock during riding 6. The bracket panel is equipped with shock-absorbing silicone gaskets, which has good anti-slip effect and protects the mobile phone from damage 7. The bracket adopts a mechanical locking design, which can be taken and released in seconds. The panel adopts a strong compression spring, which is automatically tightened and stable without offline 8. The main body of the bracket is made of reinforced nylon, which is high in strength, firm and durable, with an aluminum alloy base and connecting arm, sufficient materials and excellent workmanship. 9. Compatible with a variety of mobile phones, with a wide range of uses, and the size can be adjusted according to your own mobile phone 10. Two large universal balls rotate 360 ??degrees, and the direction and viewing angle can be adjusted with one hand to meet various angles of use 11. Eight-claw surround fixation, firm silicone sleeve positioning structure design, firm anti-shake 12. Size: 140x87mm 13. Net weight: 393g
1. 材质：铝合金+高韧性尼龙 2. 可夹手机宽度：手动测量宽度88mm(MAX)、宽度61mm(MIN) 3. 安装范围：可安装在摩托车／电动车／自行车／三轮车 4. 车把直径：适合车把直径19-30mm 5. 减震面板设计，缓冲颠簸冲击，四角配置高弹减震橡胶，内置限位螺丝，骑行过程中防抖防震 6. 支架面板带有减震硅胶垫片，防滑效果好，保护手机不受损害 7. 支架采用机械锁紧设计，秒取秒放，面板采用强力压缩弹簧，自动加紧，稳固不脱机 8. 支架主体采用加强尼龙材质，强度高，牢固耐用，铝合金底座，连接臂，用料足，做工精良， 9. 兼容多种手机，使用范围广泛，大小可根据自身手机调整 10. 两个大万向球360度旋转，可单手调节方向与视角，满足使用的各种需求角度 11. 八爪环绕固定，牢固硅胶套定位结构设计，牢固防抖 12. 尺寸：140x87mm 13. 净重：393g
提交