About the product HY008 mobile phone interface is a fixed bracket of microscope & telescope connected to mobile phone,This interface can be fixed mobile phone easy to the microscope (telescope) eyepiece, so that to watch and take pictures conveniently.
Features 1. Brand new and high quality.
2. Special removable glue-fixed, is compatible with any mobile phone.
3. Self centering, assembly and disassembly easily.
4. With tripod interface, can be used by mobile phone camera bracket.
5. Compatible with almost all microscope, telescope.
6. Compatible with most mobile phone.
7. Outer diameter of eyepiece: 27 - 42mm.
Installation steps 1. Put mobile phone on the bracket, make the lens aim to the hole in center, and then push the bottom of 3 Blue sliders from three directions, to be sure it can clamping mobile phone tightly. The next, remove mobile phone, push the sliders inward 2mm, and tighten the screws.
2. Take the wedge sleeve on the outside of the eyepiece (notice the wedge sleeve direction. if the outer diameter of eyepiece is too small, have to fix the silicone rubber gasket firstly)
3. Take the bracket sleeve onto the wedge sleeve around 1/3, and then screw up clockwise by holding the eyepiece and silicone wedge sleeve.
4. Open the mobile phone camera, fix on the bracket, and then adjusting they height of bracket by press slowly downward, until the circular frame appearing on the mobile phone screen clearly.