null 产品型号： 侵权图库
型号：TBD06044355     大类别：Consumer Electronics     第2级类别：Electronics Module  -->子类别：Other Accessories   审核产品   所有审核和提问(new)  1688链接英文名称：Adjustable Voltage Solar Charging Module Auto Power On Voltage Regulator Accessory
中文名称：可调电压太阳能充电模块 自动通电稳压配件

颜色： 包装：Plastic Bag 配件：null 装箱资料： 每箱：120pcs 重量：6kgs 外箱尺寸：51cm * 38cm * 32cm 采购:Felix  编辑:Randi(2024-01-18)  美工:Randi

给产品打分

         

1. The current size can be set for limiting the output current, constant current drive, battery charging
2. Comes with output anti-backflow function, no need to add anti-backflow diode when charging battery
3. After undervoltage protection, as long as the input voltage can be restored to start without re-power off, can be restored
4. Enlarge the heat sink and copper, high power rectifier diode
5. Usage:
- As a general lift module with overcurrent protection ability to use
- As a battery charger
- As a high-power LED constant current driver module
6. Note: this module in more than 3A, 35W use, please strengthen the heat dissipation

Parameters:
1. Input voltage: 4.8-30V
2. Output voltage: 0.5-30V
3. Output current: can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation
4. Output power: 35W with natural heat dissipation, 60W with enhanced heat dissipation
5. Conversion efficiency: 88 percent or so
6. Short circuit protection: yes
7. Operating frequency: 180KHz
8. Size: 68 x 37 x 22mm, mounting hole diameter 3mm
9. Weight: 38.7g


中文描述：

1. 可以设置电流大小，用于限制输出电流、恒流驱动、电池充电等场合
2. 自带输出防倒灌功能，给电池充电时不用另外加防倒灌二极管
3. 欠压保护后，只要达到输入电压即可恢复启动不需要重新断电,即可恢复
4. 加大散热片和敷铜，大功率整流二极管
5. 使用方法：
- 作为具有过流保护能力的普通升降压模块使用
- 作为电池充电器使用
- 作为大功率LED恒流驱动模块使用
6. 注意：本模块在超过3A、35W使用时，请加强散热

参数：
1. 输入电压：4.8-30V
2. 输出电压：0.5-30V
3. 输出电流：能长期稳定工作在3A，加强散热下可达到4A
4. 输出功率：自然散热35W，加强散热60W
5. 转换效率：百分之88左右
6. 短路保护：有
7. 工作频率：180KHz
8. 尺寸：68 x 37 x 22mm，安装孔径3mm
9. 重量：38.7g



搜索关键词：Constant Voltage, Constant Current, Voltage Regulator

OEM/ODM are Welcome! we can make Customize design and print your logo