1. Easy to install.
2. Durable and reliable.
3. Material: Platinum
4. OE number: 22401-8H515. This is just for reference, please check and confirm the OE carefully before purchasing.
5. Installation steps:
Step 1: The car is in a cooling state (important), Pull out the Ignition Wire;
Step 2: Clean around the mounting hole of the Ignition befor remove the Ignition, Ensure no drops during the installation of the Ignition plug;
Step 3: Remove the Ignition with the sleeve tool and the torque wrench;
Step 4: Cover the Ignition plug hole temporarily with tissues or dry towel during the disassembly process to avoid something droping in the hole;
Step 5: Compare the old Ignition plug and new Ignition plug about the length, thickness and with or without gasket ( Very important). Please stop Replacement if the following differences occcured: 1. more than 5mm difference in length; 2. thickness different; 3. gasket different (with or without);
Step 6: Before replacing the new Ignition plug, Smear the silicone grease on white ceramic of the Ignition, and then put the Ignition plug into the Ignition plug hole.
Step 7: Restore the Ignition plug with torque wrench. Note: the Ignition plug is not a screw, Do not tighten it with force.Gently and Straightly.
Step 8: Reconnect the Ignition wire and Ignition plug, then completely.
(PS: if you have questions about the installation steps, you can Google more information and video)
6. Fits for:
For Nissan Almera II 4-Door Sedan (N16) 2000-
For Nissan Almera II Hatchback (N16) 2000-
For Nissan Almera MPV (V10) 2000-
For Nissan Primera 4-Door Sedan (P12) 2002-
For Nissan Primera Wagon (WP12) 2002-
For Nissan Primera Hatchback (P12) 2002-
For Nissan X-TRAIL SUV (T30) 2001-2007
中文描述： 1. 易于安装。
2. 耐用可靠。
3. 材质：铂金
4. OE编号：22401-8H515.这仅供参考，购买前请仔细检查并确认OE。
5. 安装步骤：
步骤一：在汽车冷却的情况下（重要），将汽车的分火线与火花塞断开；
步骤二：拆卸火花塞前安装孔附件清洁干净，确保火花塞安装过程不会有异物掉落；
步骤三、用套筒工具结合扭力扳手将火花塞依次拆卸；
步骤四、拆卸过程中可以临时用纸巾或者干毛巾盖住火花塞孔，避免异物掉落；
步骤五、拆卸下的旧火花塞与新火花塞需要进行：长短、粗细、有无垫片的比较（特别重要），发下以下差异请停止安装：1、新旧相差5毫米以上；2、火花塞粗细不同、垫片不同（有或者无）；
步骤六：更换新的火花塞前请涂抹绝缘体部位硅脂，然后将火花塞垂直放回原处；
步骤七：用扭力扳手复原火花塞，注意：火花塞不是螺丝，不要用力拧紧，轻轻旋转直感觉紧了后，在适当拧几圈；
步骤八：重新接回分火线与火花塞，完成安装。
（PS：如果安装步骤有疑问，可以Google查询相关资料与视频）
6. 适用于车型：
适用于Nissan Almera II 4-Door Sedan (N16) 2000-
适用于Nissan Almera II Hatchback (N16) 2000-
适用于Nissan Almera MPV (V10) 2000-
适用于Nissan Primera 4-Door Sedan (P12) 2002-
适用于Nissan Primera Wagon (WP12) 2002-
适用于Nissan Primera Hatchback (P12) 2002-
适用于Nissan X-TRAIL SUV (T30) 2001-2007
侵权图库
