1. 20 PCS of dent & ding puller tab, replacement suckers in different shapes for multiple purposes.
2. Repairs the dents on your car.
3. Slide hammer is more powerful for paintless dent repair, conquer big dent.
4. Use widely for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.
5. Steps:
(1). Clean damage surface with a clean wet cloth
(2). Put the glue stick to gun and connect the power source and preheat for 5-10 minutes
(3). Pull the trigger and apply the suitable drawing gasket with extruded glue(Note: The larger the drawing gasket is, the larger the drawing force is)
(4). Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
(5). Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
(6). When dent was removal, clear the glue by alcohol with plastic shovel
(7). If dent still exists, knock it slightly with a flattening hammer with tap down head 8 Repeat the operation steps above until the dents are repaired
6. Package:
2 in 1 puller x 1
12V 20W Glue Gun x 1, cable length: 5m
Blue Tabs x 10
Red Tabs x 10
Black Glue Sticks x 5
White Glue Sticks x 5
Bridge puller with 6 tabs x 1
Shovels x 2
Towel x 1
Alcohol Bottle(Alcohol not included) x 1
English Manual x 1
Tools Bag x 1
中文描述： 1. 20 件凹痕拉环，可更换不同形状的吸盘，用于多种用途。
2. 修复汽车上的凹痕。
3. 滑动锤无漆凹痕修复更强大，征服大凹痕。
4. 广泛用于汽车、冰箱、摩托车、洗衣机等的钣金加工。
5. 步骤：
(1). 用干净的湿布清洁损坏表面
(2). 将胶棒放在喷枪上并连接电源并预热5-10分钟
(3). 扣动扳机，用挤出胶涂上合适的拉力垫片（注：拉力垫片越大拉力越大）
(4). 立即将涂有热熔胶的拉丝垫片放在凹痕中心并保持直到粘住（让胶水冷却约5-8分钟。冷却时间应小于10分钟，冬季应稍短）
(5). 对准T型修整器，用热熔胶压紧拉丝垫片，向后拉动滑杆拉起凹痕
(6). 去除凹痕时，用塑料铲用酒精清除胶水
(7). 如果凹痕仍然存在，用平锤轻轻敲击，头部向下敲击 8 重复上述操作步骤，直到凹痕修复
6. 包装：
2 合 1 拉拔器 x 1
12V 20W胶枪 x 1，线长：5m
蓝色标签 x 10
红色标签 x 10
黑色胶棒 x 5
白胶棒 x 5
带 6 个标签的桥式拉拔器 x 1
铲子 x 2
毛巾 x 1
酒精瓶（不含酒精）x 1
英文说明书 x 1
工具包 x 1
搜索关键词：Hail Removal, Dent Repair Tool, Dent Puller, Car Dent Remover Repair Kit, Car Damage Fix
OEM/ODM are Welcome! we can make Customize design and print your logo
侵权图库
