1. Effectively inhibit bacteria, remove aldehydes, deodorize and bring fresh air. 2. Safe and non-toxic, safe to use. 3. Installation steps: (1). Place the atomization disinfection machine in the car. It is best to turn on the air conditioner (cold air) and medium air circulation at the same time when disinfecting. (2). Plug in first, (3). The following switch is turned on (towards 1 vertical side), and wait for the indicator light on the top of the handle to light up. (4). Put in the disinfection water, adjust the time and close the window tightly (export the plug from the gap of the door without pressing the line. (5). After spraying, turn off the power after about 5 minutes, quickly remove the machine, close the door and let it sit for 10 minutes, then the construction can be completed. (6). After the disinfection water is sprayed out of the machine, clean it with clean water (switch to: 1 vertical side), (7). Finally, press the middle O reset switch to return to home position. 4. Parameters: Voltage: 20V / 50HZ or 110V / 50HZ Power: 1500W Control: automatic time switch Air volume: less than 10 cubic meters per hour Mute index: 40-50dB (A) Size: 38 * 23 * 36cm Spray distance: 4-5 meters The spraying distance is long, the smoke is thick, and the coverage range is about 20-50 square. 5. Applicable occasions: the place where the odor removal of the car maintenance family and the public place of the individual or the business place needs to remove the odor, formaldehyde and toxin.
中文描述: 1. 有效抑菌,除醛,消臭,带来清新空气。 2. 安全无毒,使用安心。 3. 安装步骤: (1). 将雾化消毒机放置在车内,消毒时最好同时开空调(冷风)中等风内循环。 (2). 先插电, (3). 下面的开关键开启(往1竖那边),等待把手顶上指示灯亮了。 (4). 放入消毒水,调节时间 并关严车窗(把插头从车门缝隙处导出不要压着线. (5). 喷雾喷完后,约5分钟后断开电源,将机器迅速取出,并关上车门静置10分钟,即可施工完成。 (6). 消毒水喷完机器取出后,用清水清洗(开关往:1竖那边), (7). 最后按中间 O复位开关归位。 4. 参数: 电压:20V/50HZ 或者 110V/50HZ 功率:1500W 控制:自动定时开关 风量:10立方米/小时以下 静音指标:40-50dB(A) 尺寸:38*23*36cm 喷射距离:4-5米 喷烟距离远,烟雾浓,覆盖范围约20-50平方。 5. 适用场合:个人或经营场所的汽车养护家庭以及公共场所的异味去除需除异味,除甲醛,除毒菌的场所。
OEM/ODM are Welcome! we can make Customize design and print your logo