General Introduction:
CAT.6 PATCH PANEL can be applied to 1000Mbps Ethernet Networking.
You can impact into 110IDC with 110 impact Tool or Krone impact Tool convenient.
Features meet FCC subpart 68 requirements, this Patch Panel can provide all 250 MHz bandwidth.

General Construction:
The patch panel can be mounted on any standard 483(19in) equipment rack or communication cabinet as shown.
The back cable management help you to arrange and tie the cable orderly and conveniently.

Appliance Instroduction:
AWG 22-24 C6 cable wires are recommended for this instalation,
Verifying the wiring follows the paster color code of the panel back cover,
Proper termination tools should be used ( e.g. 110 or Krone Universal Wire Insertion Tool).
Be aware of the insertion direction for wires.
When impacting the wire you must identify with standard ANSI/TIA/EIA-568A/B
Or 568B C6 permanent link conform to ANS/EIA/TIA-568.2-1

Note:
Go together with the line originally to provide the ANSI/TIA/EIA-568 B the standard card line to mark only.

Features:
Using metal materials, strong performance, dust, moisture, anti shock.
Strong anti oxidation ability and strong transmission speed, contact stability.
Provide labels and embedded icon design, easy to connect and manage.
Combined bracket structure, convenient installation operation and fixed cable.
Standard 19 inch structural design, can be directly installed in the standard rack or cabinet.
Wide range of use, widely used in indoor level area, indoor LAN wiring and other network construction projects.

Specifications:
Product Name: Distribution frame
Material: Cold rolled steel
Color: Black and white
Size: Approx. 483x40x32 mm/19.0"x1.57"x1.26"
Current Rating: 1.5 Amp Max.
Voltage Rating: 150 Volts
Contact Resistance: 20 m-ohm
Insulation Resistance: 500M-ohm
Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
Housing: PC UL94V-0
IDC: PC , Accept 22-24 AWG Solid Wire.
PCB: FR4 1.6mm(0.04") thickness, 2 layers
Applicable Cable type: 22-28AWG
Plug Times: 800 (Times)
Port Number: 24

Package Include:
1x 24 Port CAT6 Distribution frame
4x Screws
4x Ties

总体介绍：
CAT.6 PATCH PANEL可应用于1000Mbps以太网网络。
您可以使用110冲击工具或Krone冲击工具轻松冲入110IDC。
功能符合FCC子部分68的要求，此配线架可提供所有250 MHz带宽。

一般建筑：
如图所示，配线架可以安装在任何标准的483（19英寸）设备机架或通信机柜上。
背面电缆管理可帮助您有序，方便地安排和捆扎电缆。

家电介绍：
建议使用AWG 22-24 C6电缆线进行此安装，
验证接线遵循面板后盖的贴纸颜色代码，
应使用适当的端接工具
注意电线的插入方向。
撞击电线时，必须使用标准ANSI / TIA / EIA-568A / B进行识别
或568B C6永久链路符合ANS / EIA / TIA-568.2-1

注意：
与最初的线路一起提供ANSI / TIA / EIA-568 B标准卡线仅标记。

特征：
采用金属材料，性能强，防尘，防潮，防震。
抗氧化能力强，传输速度快，接触稳定。
提供标签和嵌入​​式图标设计，便于连接和管理。
组合式支架结构，安装操作方便，固定电缆。
标准19英寸结构设计，可直接安装在标准机架或机柜中。
用途广泛，广泛应用于室内水平区域，室内局域网布线等网络建设项目。

产品规格：
产品名称：配线架
材质：冷轧钢
颜色：黑色和白色
尺寸：约。 483x40x32 mm / 19.0 x1.57x1.26 inch
额定电流：1.5Amp最大值
额定电压：150伏
接触电阻：20 m-ohm
绝缘电阻：500M-ohm
介电耐压：1000 V AC RMS，60Hz 1min
外壳：PC UL94V-0
IDC：PC，接受22-24 AWG实心线。
PCB：FR4 1.6mm（0.04“）厚度，2层
适用电缆类型：22-28AWG
插件时间：800（次）
接口号：24
包装包括：
1x 24端口CAT6配线架
4x螺丝
4x钮带