null 查看产品详细信息 产品型号: 侵权图库
型号:TBD0603436702C     大类别:Consumer Electronics     第2级类别:Battery Accessories  -->子类别:Battery Storage Box   审核产品   所有审核和提问(new)  1688链接英文名称:Q6 Removable 6 Sections 18650 Battery Box Charger Case, Style: Flash/Fast Charge(Blue)
中文名称:Q6 可拆卸6节18650电池盒 充电宝外壳,款式: 闪充/快充版(蓝)
颜色:Blue
包装:Plastic Bag
配件:null
装箱资料:
每箱:288pcs
重量:30kgs
外箱尺寸:50cm * 50cm * 60cm
采购:Karl  编辑:Shadow(2023-03-25)  美工:Shadow
         

Ordinary version:
1. Output power: 12W
2. Single USB output: 5V/0.1-2.1A
3. Dual USB output: 5V/0.1-2.4A
4. Micro USB input: 5V/2A
5. Type-C/USB-C port input: 5V/2A
6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboard

Flash charging / fast charging version:
1. The first time you put the battery, you have to charge the rechargeable battery to activate the output
2. Output power: 22.5W
3. Power: 25W
4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)
5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)
6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A
7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)
8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A
9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard
10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matching

Multiple protection, high reliability:
1. Built-in input over-voltage, under-voltage protection
2. Integrated output overcurrent, overvoltage, short-circuit protection
3. Built-in battery overcharge, overdischarge and overcurrent protection
4. Built-in IC over-temperature protection
5. Integrated charge/discharge battery temperature NTC protection
6. ESD 4KV, input (including CC pins) withstand voltage 25V

1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience
2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery
3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient
4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)
5. Size: about 14.2 x 8 x 2.3cm


中文描述:

普通版:
1. 输出功率:12W
2. 单USB输出:5V/0.1-2.1A
3. 双USB输出:5V/0.1-2.4A
4. Micro USB输入:5V/2A
5. Type-C/USB-C口输入:5V/2A
6. 其他功能:长按或双击按键开启LED灯,装反不烧主板

闪充/快充版:
1.首次放入电池后,要给充电宝充电激活才有输出
2.输出功率:22.5W
3.功率:25W
4. OUT 1输出:5V/3.7A;9V/2.5A;12V/1.87A(支持5V边充边放)
5. OUT 2输出:5V/3.7A、3.3-5.5V/4.5A(VOOC/SCP)、9V/2.5A、12V/1.87A(快充口支持5V边充边放,快充模式无握手协议只有5V输出)
6. Micro USB口输入:5V/3A,9V/2A,12V/1.5A
7. Type-C/USB-C输出:5V/3.7A、9V/2.22A、3.3-11V/2A(PPS)、12V/1.67A (支持PD协议才有输出)
8. Type-C/USB-C输入:5V/3A、9V/2A、12V/1.5A
9. 其他功能:双击按键开启LED灯,装反不烧主板
10. 快充规格:需质量稳定且带数据传输充电线,没握手协议只有5V输出,快充协议匹配成功后自动调节电流电压到适用状态


多重保护、高可靠性:
1. 内置输入过压、欠压保护
2. 集成输出过流、过压、短路保护
3. 自带电池过充、过放、过流保护
4. 内置IC过温保护
5. 集成充放电电池温度NTC保护
6. ESD 4KV,输入(含CC引脚)耐压25V

1. 电池要求:平头无保护板18650电池(65mm长),内阻60毫欧以内,1C以上放电,切勿使用放置时间长,使用次数多的拆机电池,使用拆机电池会影响体验效果
2. 可重复放入6节18650电池,更换电池简单方便快捷
3. 向左旋(顺时针)为上锁,合好盖子必须上锁不然盖片会掉出来;更换电池时向右旋(逆时针)解锁,拿出盖片,即可更换电池,简单方便
4. 注意:装反不烧主板,但切勿一正一负,破皮电池要绝缘,否则会造成电池短路烧弹簧(出货不含电池)
5. 尺寸:约14.2 x 8 x 2.3cm



搜索关键词:Type-C/USB-C Mobile Power Cover, Fast Charge, Charging Treasure Shell

OEM/ODM are Welcome! we can make Customize design and print your logo