1. Video signal test function: built-in high-definition 5.0-inch 800 (RGB) x 480 wide viewing angle display, supporting PAL/NTSC image signals 2. PTZ control function: Built-in Pelco-D/P PTZ control protocol, through RS485 interface, you can control the up, down, left, right, zoom, focus, aperture size of the PTZ 3. DC12V 1A power output function: provide temporary power supply for the camera 4. Audio test function: you can test the audio equipment such as pickups on the front-end of video surveillance 5. Enhanced network cable test function: through the UTP CABLE TEST test port on the instrument 6. Support VGA video input, when accessing VGA video cable, enter the menu and select VGA mode, resolution support 1024 x 768, 1280 x 1024 7. Support HDMI video input, when accessing HDMI video cable, it will automatically switch to HDMI mode, the resolution supports 480i/P, 576i/P, 720i/P, 1080i/P 8. TVI camera test, support 720p 25/30/50/60fps/1080p 25/30fps, 5MP.8MP resolution camera image test 9. AHD camera test, support 720p 25/30fps/ 1080p25/30fps, 5MP.8MP resolution camera image test 10. CVI camera test, support 720p 25/30fps/ 1080p25/30fps, 5MP.8MP resolution camera image test 11. Built-in 3.7V 3000mAh Li-polymer battery 12. Charging time: about 2-3h 13. Use time: about 6h (without CCD power output)
Packing list: - Frequency monitoring tester x 1 - US plug adapter x 1 - BNC cable x 1 - RS485 connector x 1 - Power output conversion cable x 1 - Audio cable x 1 - Lanyard x 1 - Storage bag x 1 - Instruction manual x 1