1. Material: metal 2. Made of metal, spray painting process, durable, anti-smash, anti-prying, rust prevention 3. Environmental protection material, waterproof, rustproof and anti-corrosion, not afraid of the sun and rain, high security performance 4. Say goodbye to key unlocking, code unlocking is more convenient, three passwords, 1000 kinds of password combinations, lower test rate 5. 2.2-2.8 cm handle diameter applicable, installation at will, weighted lock body, thick lock hook, high tensile strength 6. Easy to use, easy to store, does not take up space, can also be directly installed in the car, not easy to lose 7. Weight: about 75 g 8. Size: about 7 x 5 cm
Password setting: 1. Set the code to 000 (initial code), open the locking beam and rotate it 180 degrees 2. Press and hold the locking beam (do not let go when changing) 3. Change the password by rotating the password dial 4. After the modification is completed, pull out the locking beam and put it back to the original position (please remember the new password, do not forget)
Installation steps: 1. Install the shims on the handlebar 2. Install the spacer and lock body onto the handlebar 3. Screw in a few screws 4. Install the lock body 5. Tighten the fixing screws 6. Installation is complete and ready to use
中文描述：
1. 材质：金属 2. 金属制成，喷漆工艺，经久耐用，防砸、防撬、防锈 3. 环保材质，防水防锈防腐蚀，不怕日晒雨淋，安全性能高 4. 告别钥匙开锁，密码开锁更便捷，三位密码，1000种密码组合，试开率更低 5. 2.2-2.8 cm把径适用，安装随心，加重锁体，粗壮锁钩，抗拉强度高 6. 使用方便，易于存放，不占空间，也可直接安装在车上，不易丢失 7. 重量：约75 g 8. 尺寸：约7 x 5 cm
侵权图库
