null 产品型号： 侵权图库
型号：ZY13998327     大类别：Consumer Electronics     第2级类别：Electronics Module  -->子类别：MCU Tools   审核产品   所有审核和提问(new)  ZingYing链接英文名称：Waveshare Core103V, STM32F1 Core Board
中文名称：Waveshare Core103V，STM32F1核心板 5930

颜色： 包装：Plastic Bag 配件：null 装箱资料： 每箱：390pcs 重量：15kgs 外箱尺寸：60cm * 36cm * 39cm 采购:Cary  编辑:Shadow(2019-03-30)

给产品打分

         
Overview
Core103V is a small STM32 development board that features an STM32F103VET6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F family.

As a minimal ready-to-run system, the Core103V integrates USB communication interface, JTAG/SWD programming/debugging interface, clock circuit, boot mode selection, and so on.

Furthermore, pin headers on the backside allow the Core103V to be plugged-in your application board and act as the MCU core circuit in your system. All the I/O ports are accessible on the pin headers, and the header pitch is designed as 2.54mm.

What is On Board
STM32F103VET6 development board on board resource

1. STM32F103VET6: The high performance STM32 MCU which features:
- Core: Cortex-M3 32-bit RISC
- Operating Frequency: 72MHz, 1.25 DMIPS/MHz
- Operating Voltage: 2-3.6V
- Package: LQFP100
- I/Os: 80
- Memories: 512kB Flash, 64kB RAM
- MCU communication Interfaces:
-- 3 x SPI, 5 x USART, 2 x I2S, 2 x I2C, 1 x FSMC, 1 x LCD, 1 x SDIO, 1 x USB, 1 x CAN
- AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
3. Power supply switch, powered from 5Vin or USB connection
4. Boot mode selection, for configuring BOOT0 pin
5. Boot mode selection (on bottom side), for configuring BOOT1 pin
6. Power indicator
7. VBUS LED
8. Reset button
9. 8M crystal oscillator
10. 32.768K crystal (on bottom side), for internal RTC with calibration
11. JTAG/SWD interface: for debugging/programming
12. USB connector, used for establishing USB communication between PC and the STM32 development board
13. IO expander (including VCC/GND), all the I/O pins are accessible on expansion connectors for further expansion
14. 5V in pinheader, 5V power supply input
15. USB enable jumper
- Short the jumper to enable USB function
- Open the jumper to disable, as well as taking up no I/O port
16. VBAT selection jumper
- Short the jumper to use system power supply
- Open the jumper to connect the VBAT to external power, such as battery
17. VREF selection jumper
- Short the jumper to connect VREF+/VREF- to VCC/GND
- Open the jumper to connect VREF+/VREF- to other custom pin via jumper wire

Package Contents
1. Core103V development board x 1
2. USB type A to Mini-B cable x 1
3. Software CD x 1


中文描述：
概观
Core103V是一款小型STM32开发板，采用STM32F103VET6器件作为微控制器，支持进一步扩展。它是使用STM32F系列开始应用程序开发的理想选择。

作为最小的即用型系统，Core103V集成了USB通信接口，JTAG / SWD编程/调试接口，时钟电路，引导模式选择等。

此外，背面的引脚接头允许Core103V插入应用板，并充当系统中的MCU核心电路。所有I / O端口均可通过引脚接头访问，并且接头间距设计为2.54mm。

板上有什么
STM32F103VET6开发板上的资源

1. STM32F103VET6：高性能STM32 MCU，具有：
- 核心：Cortex-M3 32位RISC
- 工作频率：72MHz，1.25 DMIPS / MHz
- 工作电压：2-3.6V
- 包装：LQFP100
- I / O：80
- 回忆：512kB闪存，64kB RAM
- MCU通信接口：
- 3 x SPI，5 x USART，2 x I2S，2 x I2C，1 x FSMC，1 x LCD，1 x SDIO，1 x USB，1 x CAN
- AD和DA转换器：3 x AD（12位，1μs，共享16个通道）; 2 x DA（12位）
- 调试/编程：支持JTAG / SWD（串行线调试）接口，支持IAP
2. AMS1117-3.3（底部）：3.3V稳压器
3. 电源开关，由5Vin或USB连接供电
4. 引导模式选择，用于配置BOOT0引脚
5. 引导模式选择（在底部），用于配置BOOT1引脚
6. 电源指示灯
7. VBUS LED
8. 重置按钮
9. 8M晶体振荡器
10. 32.768K晶振（底部），用于带校准的内部RTC
11. JTAG / SWD接口：用于调试/编程
12. USB连接器，用于在PC和STM32开发板之间建立USB通信
13. IO扩展器（包括VCC / GND），所有I / O引脚均可通过扩展连接器访问，以便进一步扩展
14. 5V引脚，5V电源输入
15. USB启用跳线
- 短接跳线以启用USB功能
- 打开跳线以禁用，以及不占用I / O端口
16. VBAT选择跳线
- 短接跳线以使用系统电源
- 打开跳线，将VBAT连接到外部电源，如电池
17. VREF选择跳线
- 将跳线短接以将VREF + / VREF-连接至VCC / GND
- 打开跳线，通过跳线将VREF + / VREF-连接到其他定制引脚

包装内容
1. Core103V开发板x 1
2. USB A型到Mini-B电缆x 1
3. 软件CD x 1



搜索关键词：Waveshare Core Core Board

OEM/ODM are Welcome! we can make Customize design and print your logo